27 Jan
2007
27 Jan
'07
1:17 p.m.
I have an old Heathkit-Zenith H/Z-19 terminal, and I am trying to
use it to connect to a Linux system. I have it set up successfully to
connect to the Linux machine, but I have a small problem. The bottom
half of the H/Z-19 screen is filled with "p"s in reverse video. When I
reach that part of the screen, everything I receive is gibberish. Most
of the characters show up as some other character. Once I reach the
very bottom of the screen, the "p"s scroll up with the rest of the
text, but come back again from the bottom. I believe this is a memory
problem, but I do not know if I am correct. Do you know what could be
causing this? If so, how could I fix it?
27 Jan
27 Jan
1:46 p.m.
I have an old Heathkit-Zenith H/Z-19 terminal, and I am trying to
use it to connect to a Linux system. I have it set up successfully to
connect to the Linux machine, but I have a small problem. The bottom
half of the H/Z-19 screen is filled with "p"s in reverse video. When I
reach that part of the screen, everything I receive is gibberish. Most
of the characters show up as some other character. Once I reach the
very bottom of the screen, the "p"s scroll up with the rest of the
text, but come back again from the bottom. I believe this is a memory
problem, but I do not know if I am correct. Do you know what could be
causing this? If so, how could I fix it?
Sounds like a video RAM failure. specifically the low nybble of the
second half of the RAM..
What follows is how _I_ would starttrying to fix it. Others may just want
to swap the terminal logic PCB (assuming you can find one).
I have the scheamtics of the terminal logic PCB in front of me. The video
RAMs are U408...U411 and look to be 2114s. That type of RAM chip is
well-known for failing.
The low nymblrs are U408 and U410, at a quick glance you wany to change
U410. Those are a column of 4 18 pin ICs to the left of the crutal (U401),
in order U408, U410, U411, U409, with the edge of the board with the 2
voltage regulators at the top (I am assuming you don't have the
'illustration booklet' that shows the PCB).
-tony
2:05 p.m.
On 27 Jan 2007 at 21:46, Tony Duell wrote:
Sounds like a video RAM failure. specifically the low
nybble of the
second half of the RAM..
Tony, I'm sure you've got a good reason for saying what you did, but
why wouldn't one look at the *high* nibble? i.e. space=hex 20,
inverse "p"=hex f0.
Cheers,
Chuck
2:48 p.m.
On 27 Jan 2007 at 21:46, Tony Duell wrote:
Yes, you're right. It's getting late, and for some reason I thought 'P'
was 4F
So change the high nybble RAM, which IIRC is U409
-tony
Sounds like a video RAM failure. specifically the
low nybble of the
second half of the RAM..
Tony, I'm sure you've got a good reason for saying what you did, but
why wouldn't one look at the *high* nibble? i.e. space=hex 20,
inverse "p"=hex f0.
6544
days inactive
6544
days old
3 comments
3 participants
participants (3)
-
ard＠p850ug1.demon.co.uk -
cclist＠sydex.com -
ericj2190＠gmail.com