BA23 setup and DZQ11 configuration - test-drb@ccmp.vtda.org

21 Mar 2007

...

Subject: Re: BA23 setup and DZQ11 configuration
   From: "Ethan Dicks" <ethan.dicks at gmail.com>
   Date: Wed, 21 Mar 2007 12:18:57 -0400
     To: "General Discussion: On-Topic and Off-Topic Posts" <cctalk at
classiccmp.org>

On 3/21/07, Allison <ajp166 at bellatlantic.net> wrote:
  I wrote
  Dave has nowhere to stuff a ROM.  The KDJ11-A
board is dual-height and
 is a CPU only 
 I'm using a KDJ11A and it boots RX02/RL02/MSCP devices with the right
 jumper setup. If memory serves the dual width J11 baord has rom on baord
 for standard device boot. My Docs for that board are burried. 
I think you must have your boot ROM on another board in your system...

http://www.ibiblio.org/pub/academic/computer-science/history/pdp-11/hardwar…

-ethan 
It's possible since I configured that system nearly 10 years ago and it 
hasn't been opened since save for cleaning the fans.  The only board that
could have a boot rom would be the RQDX3.  I'll have to check net time 
I clean the fans.

Allison