29 Jan
2002
29 Jan
'02
9:23 a.m.
Hi.
I am currently working on a NetBSD driver for the RX01/02 floppy disk
drive. (As an example for a device driver writing HOWTO.) To continue my
kernel hacking when this is finished, I am looking for docs for the
folowing cards:
M7616 KXJ11-CA J11 CPU, 512-Kbyte RAM, 64-Kbyte
PROM
This is a PDP 11 on a QBus slave card, used as universal intelligent
peripheral controller. (Wouldn't it be nice to have a PDP 11
co-processor runing some 2.xBSD in a VAX? ;-) )
M3118-YA CXA16-A 16-line Asynchronous Multiplexor
Refs: EK-CAB16-TM, EK-CAB16-UG
M3119-YA CXY08-A 8-Line Asynchronous Multiplexor
Refs: EK-CXY08-TM
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
29 Jan
29 Jan
2:37 p.m.
Jochen Kunz wrote:
Hi.
I am currently working on a NetBSD driver for the RX01/02 floppy disk
drive. (As an example for a device driver writing HOWTO.) To continue my
kernel hacking when this is finished, I am looking for docs for the
folowing cards:
M7616 KXJ11-CA J11 CPU, 512-Kbyte RAM, 64-Kbyte
PROM
This is a PDP 11 on a QBus slave card, used as universal intelligent
peripheral controller. (Wouldn't it be nice to have a PDP 11
co-processor runing some 2.xBSD in a VAX? ;-) )
M3118-YA CXA16-A 16-line Asynchronous Multiplexor
Refs: EK-CAB16-TM, EK-CAB16-UG
I send this one to Chuck McManis, apparently he's working
on that too. I cannot possibly ship it through my modem
right now.
M3119-YA CXY08-A 8-Line Asynchronous Multiplexor
Refs: EK-CXY08-TM
--
Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org
Medical Information Scientist Regenstrief Institute for Health Care
Adjunct Assistant Professor Indiana University School of Medicine
tel:1(317)630-7960 http://aurora.regenstrief.org
4:51 p.m.
I thought I had put it up already. You can find it at:
<http://www.mcmanis.com/chuck/computers/vaxen/boards.htm>
--Chuck
At 11:37 PM 1/29/02 -0500, Gunther Schadow wrote:
Jochen Kunz wrote:
Hi.
I am currently working on a NetBSD driver for the RX01/02 floppy disk
drive. (As an example for a device driver writing HOWTO.) To continue my
kernel hacking when this is finished, I am looking for docs for the
folowing cards:
M7616 KXJ11-CA J11 CPU, 512-Kbyte RAM, 64-Kbyte
PROM
This is a PDP 11 on a QBus slave card, used as universal intelligent
peripheral controller. (Wouldn't it be nice to have a PDP 11
co-processor runing some 2.xBSD in a VAX? ;-) )
M3118-YA CXA16-A 16-line Asynchronous Multiplexor
Refs: EK-CAB16-TM, EK-CAB16-UG
I send this one to Chuck McManis, apparently he's working
on that too. I cannot possibly ship it through my modem
right now.
M3119-YA CXY08-A 8-Line
Asynchronous Multiplexor
Refs: EK-CXY08-TM
--
Gunther Schadow, M.D., Ph.D. gschadow(a)regenstrief.org
Medical Information Scientist Regenstrief Institute for Health Care
Adjunct Assistant Professor Indiana University School of Medicine
tel:1(317)630-7960 http://aurora.regenstrief.org
30 Jan
30 Jan
8:41 a.m.
On 2002.01.30 07:51 Chuck McManis wrote:
I thought I had put it up already. You can find it
at:
<http://www.mcmanis.com/chuck/computers/vaxen/boards.htm>
Ahhh. Seams that
the CXA16 is already supported by NetBSD, as it
emulates a DHU11 or DHV11. (Jumper selectable.) So no need for kernel
hacking here. The same for the CXY08.
But I still need the connector pinout for the Emulex QS09. This emulates
two CXY08 and has four 36 pin DB-HD connectors.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
11:08 a.m.
Except that it isn't true. The CXY08 _does_ work but the CXA16 does not.
Further the CXY08 doesn't work in DMA mode.
--Chuck
At 02:41 PM 1/30/02, Jochen Kunz wrote:
On 2002.01.30 07:51 Chuck McManis wrote:
I thought I had put it up already. You can find
it at:
<http://www.mcmanis.com/chuck/computers/vaxen/boards.htm>
Ahhh. Seams that
the CXA16 is already supported by NetBSD, as it
emulates a DHU11 or DHV11. (Jumper selectable.) So no need for kernel
hacking here. The same for the CXY08.
But I still need the connector pinout for the Emulex QS09. This emulates
two CXY08 and has four 36 pin DB-HD connectors.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
6:18 p.m.
On 2002.01.31 02:08 Chuck McManis wrote:
Except that it isn't true. The CXY08 _does_ work
but the CXA16 does
not. Further the CXY08 doesn't work in DMA mode.
Hmmm. I will have a look at
it. Perhaps this wil result in an enhanceed
dhu driver instead of a complete new driver...
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
8361
days inactive
8363
days old
5 comments
3 participants
participants (3)
-
cmcmanis＠mcmanis.com -
gunther＠aurora.regenstrief.org -
jkunz＠unixag-kl.fh-kl.de