Well, the speakers are probably 6". We are playing instrumental
music, nothing too heavy. Both drives were Micropolis, IDE-based,
like most newer Macs. Nothing much bangs on the table, except
the speaker vibrations. Could it be the Yamaha keyboard or
amplifier (just regular black box)
> >
> >
> >
> > The speakers MIGHT be the problem. There is a pair of them, each
> > twice the size of an IMSAI, right beneath the macintosh
>
> I see... Now, while a lot of older drives locked the pack to the
spindle
using a fairly
powerful magnet (and 3.5" floppy drives still do), I'd
still not want to run a hard disk near speakers of that size. Can you
rearange the layout of the room a little?
-tony
Guys! I know of several deaf and impaired hearing people who likes
music at full blast thru regular quality 60W with subwoofer and their
hard drives cared nothing a whit about vibration level. I think
something is funny: (Thobbing of music...boom boom bop...)
1. Did someone disconnect/connect scsi stuff often?
2. Did something bang the table where Mac sits often?
3. Specific brands is no better than some and why didn't Max give us
what kind of both toasted hds was?
4. Termination issues sometimes cooks the hd especially selection of
termination power used.
5. Sharp resonanent sounds sometimes can make the pc chassis
resosate thus killing hd life early. That does means to some
machines with plastic chassis and some that will resnsonate, shaking
the hd long and often. Push and pull on that hard drive bay to see
how much it can shift or "pluck" it to see if it does vibrate.
Magnetic field have nearly no effect on hd's inside that steel boxes
unless Apple used plastic shell with thin tin sheets which that
requires you to remove either speakers or the pc to different
location at least 6" to 3 feet away.
Magnetic field strength falls away at logithmic rate with increaseing
distrance from the source.
Jaosn D.
______________________________________________________
Get Your Private, Free Email at
http://www.hotmail.com