4 Aug
2000
4 Aug
'00
4:38 a.m.
Hello, all:
It's been a long time since I've banged around pure DOS, so I can't
remember all of its tricks. Here's what I want to do. I want to occasionally
hook a terminal to a small 486 SBC/data collector which is running
"headless." I seem to remember that the console I/O can be redirected to a
COM port with a command like "MODE COM1:=CON" or something like that. I'm
not at home now, so I can't try it, but am I on the right track? Will that
redirect both screen and keyboard I/O?
Rich
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
4 Aug
4 Aug
5:15 a.m.
It's been a long time since I've banged
around pure DOS, so I can't
remember all of its tricks. Here's what I want to do. I want to occasionally
hook a terminal to a small 486 SBC/data collector which is running
"headless." I seem to remember that the console I/O can be redirected to a
COM port with a command like "MODE COM1:=CON" or something like that. I'm
not at home now, so I can't try it, but am I on the right track? Will that
redirect both screen and keyboard I/O?
I thought the command was STTY -- for example, STTY NUL is a great way
to make your computer pathologically introverted. ;-)
--
----------------------------- personal page: http://www.armory.com/~spectre/ --
Cameron Kaiser, Point Loma Nazarene University * ckaiser(a)stockholm.ptloma.edu
-- "I'd love to go out with you, but I'll be at the opening of my garage
door."
7:13 a.m.
On Fri, 4 Aug 2000, Cameron Kaiser wrote:
That's Unix.
Sellam International Man of Intrigue and Danger
------------------------------------------------------------------------------
Looking for a six in a pile of nines...
VCF 4.0 is September 30-October 1
San Jose Convention Center, San Jose, California
See http://www.vintage.org for details!
It's been
a long time since I've banged around pure DOS, so I can't
remember all of its tricks. Here's what I want to do. I want to occasionally
hook a terminal to a small 486 SBC/data collector which is running
"headless." I seem to remember that the console I/O can be redirected to a
COM port with a command like "MODE COM1:=CON" or something like that. I'm
not at home now, so I can't try it, but am I on the right track? Will that
redirect both screen and keyboard I/O?
I thought the command was STTY -- for example, STTY NUL is a great way
to make your computer pathologically introverted. ;-)
7:12 a.m.
On Fri, 4 Aug 2000, Cini, Richard wrote:
It's been a long time since I've banged
around pure DOS, so I can't
remember all of its tricks. Here's what I want to do. I want to occasionally
hook a terminal to a small 486 SBC/data collector which is running
"headless." I seem to remember that the console I/O can be redirected to a
COM port with a command like "MODE COM1:=CON" or something like that. I'm
not at home now, so I can't try it, but am I on the right track? Will that
redirect both screen and keyboard I/O?
Yes, you're on the right track. Try going into DOS and type HELP MODE.
That may have more info.
Sellam International Man of Intrigue and Danger
------------------------------------------------------------------------------
Looking for a six in a pile of nines...
VCF 4.0 is September 30-October 1
San Jose Convention Center, San Jose, California
See http://www.vintage.org for details!
8:05 a.m.
It's been a long time since I've banged
around pure DOS, so I can't
remember all of its tricks. Here's what I want to do. I want to occasionally
hook a terminal to a small 486 SBC/data collector which is running
"headless." I seem to remember that the console I/O can be redirected to a
COM port with a command like "MODE COM1:=CON" or something like that. I'm
not at home now, so I can't try it, but am I on the right track? Will that
redirect both screen and keyboard I/O?
CTTY <dev>
CTTY AUX
or
CTTY COM1
CTTY CON will reset to startup conditions.
The command is available starting with DOS 2.0 and
schould still work fine with DO above 5.0 (never tested)
You may assign any two way character device (Well,
depending on your drivers one way devices may also
produce _some_ result.
Be aware that _only_ the DOS in/output functions are
redirected. Only programms using INT 21h 01h-0Ch
(except the AUX and Print functions 04h-06h) will
produce acceptable results. all other ways, including
BIOS character I/O may or may not work, depending
on your version of DOS (Basicly the BIOS functions
will not work, but there are some special Versions
of DOS (or DOSalikes) where CTTY is also redirecting
the BIOS functions).
CTTY COM1
MODE LPT1=COM1
may be used to redirekt printer output to your terminal
(DOS 3.2 and above).
Gruss
H.
--
VCF Europa 2.0 am 28./29. April 2001 in Muenchen
http://www.vintage.org/vcfe
http://www.homecomputer.de/vcfe
8719
days inactive
8719
days old
4 comments
4 participants
participants (4)
-
foo＠siconic.com -
Hans.Franke＠mch20.sbs.de -
RCini＠congressfinancial.com -
spectre＠stockholm.ptloma.edu