I had an ASR33 shipped to me from the US. I had the vendor ship the machine
in 3 different boxes. The case, base&typing unit, and stand were in
separate boxes with plenty of packing.
The cost of shipping was high, but the machine arrived in tact. Shipping
the machine from Seattle to Calgary was about US$350.00.
I would recommend having a piece in a box within a box with plenty of
padding between the item and between the inner/outer box should allow the
item to survive. The heavier the box, the more likely it will suffer
On Fri, Oct 28, 2011 at 8:17 AM, Bill Sudbrink <wh.sudbrink at verizon.net>wrote:
Nick Jarmany wrote:
All recommendations gratefully received!
The typing unit _MUST_BE_ screwed to the base via
the shipping screws. Otherwise, it will bounce
around and break the plastic cover and possibly
itself as well. You will really need someone on
site that knows a little about the unit.