15 Dec
2014
15 Dec
'14
12:49 p.m.
From: Pete Turnbull
Actually, setting switch 1 (in the pack at E83, beside
the LEDs) on
should disable the console ... I can't remember if that's a hardware
issue or a ROM function.
The manual (Section 2.2.2.4, EK-KDJ1B-UG-001 - thanks for the tip about that
section, Glen :-) sure makes it sound like it's in software: "Any input from
the console results in an error message to inform the user that the console
is disabled" - I doubt that functionality is implemented in the UART... :-)
Noel
15 Dec
15 Dec
2:29 p.m.
On 15/12/2014 20:49, Noel Chiappa wrote:
<grin> Indeed, but what I meant was I couldn't remember if it disables
the console by disabling its addresses, or merely ignoring input.
Apparently the latter. And it tells you off, to boot :-)
--
Pete
Pete Turnbull
From: Pete
Turnbull
Actually, setting switch 1 (in the pack at E83,
beside the LEDs) on
should disable the console ... I can't remember if that's a hardware
issue or a ROM function.
The manual (Section 2.2.2.4, EK-KDJ1B-UG-001 - thanks for the tip about that
section, Glen :-) sure makes it sound like it's in software: "Any input from
the console results in an error message to inform the user that the console
is disabled" - I doubt that functionality is implemented in the UART... :-)
3660
days inactive
3660
days old
1 comments
2 participants
participants (2)
-
jnc＠mercury.lcs.mit.edu -
pete＠dunnington.plus.com