12 Apr
2012
12 Apr
'12
2:54 a.m.
Does anyone have experience converting a Commodore 64 from NTSC to PAL ?
Jeffrey Brace
12 Apr
12 Apr
6:14 a.m.
Am 12.04.2012 08:54, schrieb Jeffrey Brace:
Does anyone have experience converting a Commodore 64
from NTSC to PAL ?
I don't think it is worth the trouble. You have to replace the
VIC-II video chip with the PAL version, the 14.318MHz xtal with
an uncommon 17.734MHz one, and maybe also the video modulator.
You should also have a 220V/50Hz power source handy.
The PAL/NTSC jumper on the board is not at all sufficient.
Such components are easiest obtained from an existing PAL C64
which is pretty common at some auction site. (well, maybe
unless it is some less common PAL version, like PAL with 60Hz).
--
Holger
13 Apr
13 Apr
12:46 a.m.
-----Original Message-----
From: Holger Veit
Sent: Thursday, April 12, 2012 6:14 AM
To: General Discussion: On-Topic Posts Only
Subject: Re: Commodore 64 conversion from NTSC to PAL
I don't think it is worth the trouble. You have to
replace the
You should also have a 220V/50Hz power source handy.
I was told that if you did the conversion that you could use the existing
power supply.
I found an article from Commodore World Issue#20, Page 46, which details
what you have to do and it mentions nothing about power supply.
which is pretty common at some auction site. (well,
maybe
The conversion was suggested to me because they seemed to indicate that it
was more trouble to find and ship a PAL c64.
Jeff Brace
4460
days inactive
4461
days old
2 comments
2 participants
participants (2)
-
arkaxow＠gmail.com -
holger.veit＠iais.fraunhofer.de