11 Aug
2002
11 Aug
'02
6:18 p.m.
Hello,
I picked up a Teletype model 43 terminal at a hamfest this
weekend. It needs a new plastic bar that separates the
incoming from the outgoing paper as well as a new ribbon.
I'd also like to get a manual for it, although it appears to
be a pretty straightforward piece of machinery.
Any recommendations on places to go for spare parts?
Dan
12 Aug
12 Aug
1:59 a.m.
"Dan Veeneman" <dan(a)ekoan.com> said:
I picked up a Teletype model 43 terminal at a hamfest
this
weekend. It needs a new plastic bar that separates the
incoming from the outgoing paper as well as a new ribbon.
Can't help with the
plastic bar, but if the ribbon is an endless loop type
ribbon, you can usually pop off the plastic cover and a quick spray of WD40
will restore it to usability. If it's a single-run ribbon, you can't do
this.
This is only intended as a stopgap measure until you find a new ribbon. I've
used this trick on an Epson LX-80 and managed to get a few more weeks out of
the ribbon (the local office supply store had a three week leadtime for a
new ribbon).
Later.
--
Phil.
philpem(a)dsl.pipex.com
http://www.philpem.dsl.pipex.com/
8049
days inactive
8050
days old
1 comments
2 participants
participants (2)
-
dan＠ekoan.com -
philpem＠dsl.pipex.com