18 May
2003
18 May
'03
9:17 a.m.
Meep! I can do all of that apart from the LocalTalk
bridge and the
Workstation card,
The localtalk bridge isn't needed if you are going to a mac that supports
Localtalk directly Basically, anything after the 128 and before the iMac.
The 128 doesn't have built in localtalk support IIRC, and the iMac and
later don't have serial ports to the bridge is needed to connect to their
Ethernet ports for Ethertalk.
If you don't have a workstation card for the II, it will probably be
cheaper/easier to get a Rom 3 IIgs and use the built in localtalk on that.
-chris
<http://www.mythtech.net>
19 May
19 May
3:31 p.m.
-----Original Message-----
From: cctech-admin(a)classiccmp.org [mailto:cctech-admin@classiccmp.org]On
Behalf Of chris
Sent: 18 May 2003 15:16
To: Classic Computers
Subject: RE: Data transfer from Apple ][ to PC
Excellent, that means I have everything here including the network cables.
thanks guys'n'gals!
--
adrian/witchy
www.binarydinosaurs.co.uk - the online computer museum
www.snakebiteandblack.co.uk - monthly gothic shenanigans
Meep! I can do all of that apart from the
LocalTalk bridge and the
Workstation card,
The localtalk bridge isn't needed if you are going to a mac that supports
Localtalk directly Basically, anything after the 128 and before the iMac.
The 128 doesn't have built in localtalk support IIRC, and the iMac and
later don't have serial ports to the bridge is needed to connect to their
Ethernet ports for Ethertalk.
If you don't have a workstation card for the II, it will probably be
cheaper/easier to get a Rom 3 IIgs and use the built in localtalk on that.
7906
days inactive
7907
days old
1 comments
2 participants
participants (2)
-
cb＠mythtech.net -
witchy＠binarydinosaurs.co.uk