14 Nov
2001
14 Nov
'01
4:30 a.m.
While trying to get the 8K BASIC to work with the Altair emulator, I've
figured-out that there must be some way for the user to define, using the
sense switches, which I/O ports could be used for the console.
Does anyone have the manual for 8K BASIC or handwritten notes on the topic?
I need to find the definition of the switches at startup because I'm losing
console input on the emulator when using 8K BASIC.
Thanks.
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
14 Nov
14 Nov
6:27 a.m.
Hi.
Sense Switch Terminal Load
Setting Switches Switches
Channels
Device
2sio 0 none
none 20,21
(2 stop bits)
2sio 1 a12
a8 20,21
(1 stop bit)
sio 2 a13
a9 0,1
acr 3 a13, a12
a9,a8 6,7
4pio 4 a14
a10 40,41,42,43
pio 5 a14,a12
a10,a8 4,5
hsr 6 a14,a13
a10,a9 46,47
nonstandard
term 14
no term 16
;)
- Mike: dogas(a)bellsouth.net
----- Original Message -----
From: Cini, Richard <RCini(a)congressfinancial.com>
To: 'ClassCompList' <classiccmp(a)classiccmp.org>
Sent: Wednesday, November 14, 2001 1:30 PM
Subject: Altair 8K BASIC configuration
While trying to get the 8K BASIC to work with the
Altair emulator, I've
figured-out that there must be some way for the user to define, using the
sense switches, which I/O ports could be used for the console.
Does anyone have the manual for 8K BASIC or handwritten notes on the
topic?
I need to find the definition of the switches at
startup because I'm
losing
console input on the emulator when using 8K BASIC.
Thanks.
==========================
Richard A. Cini, Jr.
Congress Financial Corporation
1133 Avenue of the Americas
30th Floor
New York, NY 10036
(212) 545-4402
(212) 840-6259 (facsimile)
8444
days inactive
8444
days old
1 comments
2 participants
participants (2)
-
dogas＠bellsouth.net -
RCini＠congressfinancial.com