Let's assume you do not have an IBM clone or access to one... First you would download the file from the FTP site. Second while on the (I assume more powerful) internet connecting machine you uncompress the file if it is compressed (usually ZIPped I've seen). Third, Transfer it to the 64. Now if it is a D64 file you will need to save it to a drive that has a larger capacity then a 1541, such as a 1571, 1581, 256k+ REU w/ramdisk running or a CMD Hard Drive. The easiest transfer would be via modem to modem or a simple null-modem cable (plans are on the net), there are other options including making your IBM, Amiga or whatever act as a slave drive for your 64 and just doing a file copy... (special cable like x1541 needed) Finaly (if nesessary) convert the file, it it is .D64 there are a few d64 to 1541 utilities out there for both the 64 and 128. T64 is a different story, it will need to go to tape, and even though I know it can be done I am unsure whether or not a utility exists yet for the 64. Now you should be able to load and run the program (note some of the programs may have problems due to being either written for NTSC or PAL video modes and your computer being the other... :/ Larry Anderson -- -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+- Visit our web page at: http://www.goldrush.com/~foxnhare/ Call our BBS (Silicon Realms BBS 300-2400 baud) at: (209) 754-1363 -+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-