11 Jul
2004
11 Jul
'04
3:58 a.m.
Hi All
If anyone going to VCF and is interested in Symbolics workstations or
any type of Lisp Machine (like CADR's), and would like to get together
and talk about them, let me know (via email).
I should probably have put together a talk about my explorations
tracking down old lispm's and emulating lisp machine microcode - maybe
for next year.
I'll certainly be there, floating around looking for (more) unibus
hardware and I'll be at the Atari 7800 talk.
-brad
Brad Parker
11 Jul
11 Jul
6:36 a.m.
There is a CADR in the area, several people have been asking about it,
and its current
owner (local to VCF East) may be at the show.
I sold my CADR and all the LMI spares to a list member some time back,
and I gave
my 3640 away also. But I was the 'last' factory trained CADR support
person from
LMI.
I do have a set of Lambda boards however, and a few NuMachine boards. I
can place
them at my VCF Vendor booth if your interested.
If you want to talk lispm hardware, look for me at the HP 1000
minicomputer exhibit, or
at the vendor booth selling the Imsai 8080 system.
Brad Parker wrote:
Hi All
If anyone going to VCF and is interested in Symbolics workstations or
any type of Lisp Machine (like CADR's), and would like to get together
and talk about them, let me know (via email).
I should probably have put together a talk about my explorations
tracking down old lispm's and emulating lisp machine microcode - maybe
for next year.
I'll certainly be there, floating around looking for (more) unibus
hardware and I'll be at the Atari 7800 talk.
-brad
Brad Parker
12 Jul
12 Jul
2:44 a.m.
Bob -
I'd definitely be interested if you brought your boards.
-- Tony
-----Original Message-----
From: cctech-bounces(a)classiccmp.org [mailto:cctech-bounces@classiccmp.org]
On Behalf Of Bob Shannon
Sent: Sunday, July 11, 2004 2:36 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: VCF and lisp machines
There is a CADR in the area, several people have been asking about it,
and its current
owner (local to VCF East) may be at the show.
I sold my CADR and all the LMI spares to a list member some time back,
and I gave
my 3640 away also. But I was the 'last' factory trained CADR support
person from
LMI.
I do have a set of Lambda boards however, and a few NuMachine boards. I
can place
them at my VCF Vendor booth if your interested.
If you want to talk lispm hardware, look for me at the HP 1000
minicomputer exhibit, or
at the vendor booth selling the Imsai 8080 system.
Brad Parker wrote:
Hi All
If anyone going to VCF and is interested in Symbolics workstations or
any type of Lisp Machine (like CADR's), and would like to get together
and talk about them, let me know (via email).
I should probably have put together a talk about my explorations
tracking down old lispm's and emulating lisp machine microcode - maybe
for next year.
I'll certainly be there, floating around looking for (more) unibus
hardware and I'll be at the Atari 7800 talk.
-brad
Brad Parker
15 Jul
15 Jul
12:24 a.m.
Brad Parker <brad(a)heeltoe.com> writes:
If anyone going to VCF and is interested in Symbolics
workstations or
any type of Lisp Machine (like CADR's), and would like to get together
and talk about them, let me know (via email).
I think Lenny Foner will be at VCF.
He's a former Symbolics employee, and has a MacIvory at home,
plus some mutual friends of ours used to have a pair of CADR's
in their basement.
Some of the Rhode Island Retro folks are likely to be around, too,
and they've been restoring one of their 3640's lately.
7417
days inactive
7421
days old
3 comments
4 participants
participants (4)
-
akb+lists.cctech＠imap1.mirror.to -
brad＠heeltoe.com -
bshannon＠tiac.net -
tony.eros＠machm.org