On 7 Oct 2001 1:36:56 +0100 "Iggy Drougge" <optimus(a)canit.se> said:
Philip Pemberton skrev:
>I've got two Western Design Center W65SC02s
(14MHz >6502s! Woohoo!) to
play
>with, plus a Synertek SY6502A (the 2MHz one), two
W65SC22s (10MHz WDC
6502s)
and two
Synertek 6522s (1MHz).
14 MHz? You're kidding! That's criminally fast!
I kid you not! Go to
www.6502.org, grab the datasheet for the W65SC02 and
look at page 43.
For $4, it's bloody good value. Anyone care to start another bulk-buy? Maybe
Mike Nabarezny (sp?), webmaster of
6502.org and the guy who did the original
6502 Bulk Order would care to do another one?
> 2) Has anyone got a schematic for a fairly
half-decent 16-colour (or
>better) video card that can be modified to work on a 6502? I've had a
look
>at the NASCOM schematics but I've heard Bad
Things(tm) about the NASCOM
>video system. Aparrently Gemini and a few others produced colour video
cards
>for the NASCOM. Anyone got schematics for these?
Graphics would also be
nice
(the NASCOM
video system is text only).
Tony mentioned teletext chips a few days ago. Don't
know if those perhaps
are
only 8-colour, though. Tony?
I've got an
SAA5050. Anyone know how to use it without the SAA5020 timing
generator?
I've also got a Microvitec Cub 653 monitor. TTL input, composite sync. How
can I get Csync from Vsync and Hsync?
> BTW, I'd like to avoid obsolete components
if that's at all possible.
>I've got a Hitachi HD6845 but if the 40-odd page datasheet is anything to
go
>by, it's a real dog to use... And it only
works in monochrome. I have got
a
>MOS Tech 6568(?) VIC-II, the same one used in the
UK Commodore 64. The
PSU
for this C64 is
fried, took out some of the support components with it.
The VIC is quite
well-documented, and it would certainly be interesting to
see
it in a non-C64, 14 MHz 6502 system. =)
I doubt
a VIC will run at 14MHz.
Later.
--
Phil.
philpem(a)bigfoot.com
http://www.philpem.f9.co.uk/