22 May
2002
22 May
'02
5:41 a.m.
Hi Dan
I'm not sure but it looks like it may be
a "Standard Bus" type board. I don't recall the
pin combinations but it looks like the same
form factor.
There are a lot of different Standard Bus manufactures
and you should be able to get cards and back planes
easily. Count the pins and look the spec up on the
web and see if it looks the same.
Dwight
From: "Dan Veeneman" <dan(a)ekoan.com>
At 03:10 PM 5/21/02 -0700, Ethan Dicks wrote:
--- Dan Veeneman <dan(a)ekoan.com> wrote:
Sure. A few pictures can now be found here:
http://www.decodesystems.com/help-wanted/1802-board.html
Cheers,
Dan
http://www.decodesystems.com/wanted.html
Circuit board with a socketed 1802
microprocessor
How about a picture? (the 1802 is one of my favorites) 
22 May
22 May
7:29 a.m.
New subject: Standard Bus Mostek cards, was Re: Any stories of Dayton?
At 10:41 AM 5/22/02 -0700, you wrote:
I'm not sure but it looks like it may be
a "Standard Bus" type board. I don't recall the
pin combinations but it looks like the same
form factor.
The form factor is similar but the pins don't line up.
I've got three Mostek STD-Z80 Bus cards here (but no
chassis) that I've lined up with the 1802 card. The
STD-Z80 Bus pins are thinner and there are more of them.
(Sorry for the lack of details, it was a quick compare.)
There are a lot of different Standard Bus
manufactures
and you should be able to get cards and back planes
easily.
Any recommendations on where to get a chassis and
power supply for the STD-Z80 Bus cards I've got?
Cheers,
Dan
8298
days inactive
8298
days old
1 comments
2 participants
participants (2)
-
dan＠ekoan.com -
dwightk.elvey＠amd.com