26 Feb
2012
26 Feb
'12
10:46 p.m.
I'm divesting myself of most of my q-bus stuff, starting with the
uVax board sets.
M7169 - 4-plane video controller module
M7168 - 4-plane color bitmap module (x2)
M7622 - 16-Mbyte RAM for KA650 (MicroVAX III) (x2)
M7625 - MicroVAX III CPU (workstation license), 60nS
M7606-EF Microvax II CPU
M7609 - 8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II) (x2)
I also have the cable for the video card, and a couple of those
switch panels for the CPU's
I just need to unload this, make me an offer; would prefer to
sell the lot. I could also be bribed to ship this internationally;
make me a good offer, and maybe we can cut a deal.
Shipping will be from STockton, CA 95212 (USA)
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
1 Mar
1 Mar
10:27 a.m.
I have replied a couple of times to the email address n0body.h0me at inbox.com
with regards to this and had no reply. I am not sure if I have been
responding to the wrong address, but I am interested and would like to know
if my emails have been received.
Regards
Rob
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of N0body H0me
Sent: 27 February 2012 06:47
To: cctalk at classiccmp.org
Subject: uVax II / III boards offered
I'm divesting myself of most of my q-bus stuff, starting with the uVax
board
sets.
M7169 - 4-plane video controller module
M7168 - 4-plane color bitmap module (x2)
M7622 - 16-Mbyte RAM for KA650 (MicroVAX III) (x2)
M7625 - MicroVAX III CPU (workstation license), 60nS M7606-EF Microvax II
CPU
M7609 - 8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II) (x2)
I also have the cable for the video card, and a couple of those switch
panels
for the CPU's
I just need to unload this, make me an offer; would prefer to sell the
lot. I
could also be bribed to ship this internationally;
make me a good offer,
and
maybe we can cut a deal.
Shipping will be from STockton, CA 95212 (USA)
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
11:04 a.m.
Hi Rob,
I you can't get those boards, let me know. I have plenty,
Paul
On 3/1/12, Rob Jarratt <robert.jarratt at ntlworld.com> wrote:
I have replied a couple of times to the email address
n0body.h0me at inbox.com
with regards to this and had no reply. I am not sure if I have been
responding to the wrong address, but I am interested and would like to know
if my emails have been received.
Regards
Rob
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of N0body H0me
Sent: 27 February 2012 06:47
To: cctalk at classiccmp.org
Subject: uVax II / III boards offered
I'm divesting myself of most of my q-bus stuff, starting with the uVax
board
sets.
M7169 - 4-plane video controller module
M7168 - 4-plane color bitmap module (x2)
M7622 - 16-Mbyte RAM for KA650 (MicroVAX III) (x2)
M7625 - MicroVAX III CPU (workstation license), 60nS M7606-EF Microvax II
CPU
M7609 - 8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II) (x2)
I also have the cable for the video card, and a couple of those switch
panels
for the CPU's
I just need to unload this, make me an offer; would prefer to sell the
lot. I
could also be bribed to ship this
internationally; make me a good offer,
and
maybe we can cut a deal.
Shipping will be from STockton, CA 95212 (USA)
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
11:14 a.m.
New subject: DEC H960 Rack Connecting Brackets
I was able to get two H960 racks (Thanks Doc!) and what I am looking for now are the
brackets that connect 2 racks together. Does any one have any of these? Or have a photo
of what one looks like? Thanks.
Todd Paisley
8:41 p.m.
New subject: DEC H960 Rack Connecting Brackets
There are two bars (about 6 ft long) less than an inch wide and 2 or 3
inches deep.
The front and rear are different. I think 4 or 8 set screws were used
to hold everything together. You can bolt them together without the
filler strips and it will still look pretty nice.
Paul
On 3/1/12, paisley at erols.com <paisley at erols.com> wrote:
I was able to get two H960 racks (Thanks Doc!) and what I am looking for now
are the brackets that connect 2 racks together. Does any one have any of
these? Or have a photo of what one looks like? Thanks.
Todd Paisley
2 Mar
2 Mar
12:55 a.m.
New subject: DEC H960 Rack Connecting Brackets
H960 Racks are a perennial problem to get hold of. However DEC rack mounting
OEM systems would go into non DEC supplied racks. Apart from DEC Racks
usually being painted black I believe most of the Beige bits would bolt onto
non DEC racks.
Does anybody have any experience of making non DEC sourced racks look like
DEC ones?
Regards
?
Rod Smallwood
?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of paisley at erols.com
Sent: 01 March 2012 19:15
To: General Discussion: On-Topic Posts Only; 'General Discussion: On-Topic
and Off-Topic Posts'
Subject: DEC H960 Rack Connecting Brackets
I was able to get two H960 racks (Thanks Doc!) and what I am looking for now
are the brackets that connect 2 racks together. Does any one have any of
these? Or have a photo of what one looks like? Thanks.
Todd Paisley
2:20 a.m.
New subject: DEC H960 Rack Connecting Brackets
On Fri, Mar 2, 2012 at 9:55 AM, Rod Smallwood
<rodsmallwood at btconnect.com> wrote:
H960 Racks are a perennial problem to get hold of.
However DEC rack mounting
OEM systems would go into non DEC supplied racks. Apart from DEC Racks
usually being painted black I believe most of the Beige bits would bolt onto
non DEC racks.
Does anybody have any experience of making non DEC sourced racks look like
DEC ones?
I have yet to find non DEC racks that'll fit and work nicely with a
H960. Everything I've tried, from early 2000s to current HP rack
mounting kits to late 2000s to current EMC kits simply don't work/fit
at all.
re,
Sander
10:46 p.m.
New subject: DEC H960 Rack Connecting Brackets
Interesting - I meant replacing the whole rack with a non-DEC one and then
making it look like a DEC one.
You make a good point about making the slides fit.
There is some basic compatability. For example an 11X84 cab is 42inchs = 24U
(42"/1.75)
Whilst it's not kosher I have on some non-DEC systems used fairly thick
aluminum angle to support a rack unit without slides. Drill to match the
position of the captive nuts and the front panel.
Regards
?
Rod Smallwood
?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Sander Reiche
Sent: 02 March 2012 10:21
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: DEC H960 Rack Connecting Brackets
On Fri, Mar 2, 2012 at 9:55 AM, Rod Smallwood
<rodsmallwood at btconnect.com> wrote:
H960 Racks are a perennial problem to get hold of.
However DEC rack
mounting
OEM systems would go into non DEC supplied racks.
Apart from DEC Racks
usually being painted black I believe most of the Beige bits would bolt
onto
non DEC racks.
Does anybody have any experience of making non DEC sourced racks look like
DEC ones?
I have yet to find non DEC racks that'll fit and work nicely with a
H960. Everything I've tried, from early 2000s to current HP rack
mounting kits to late 2000s to current EMC kits simply don't work/fit
at all.
re,
Sander
1 Mar
1 Mar
11:28 a.m.
I replied as well, but there seems to be... n0b0dy h0me...
re,
Sander Reiche
On Thu, Mar 1, 2012 at 7:27 PM, Rob Jarratt <robert.jarratt at ntlworld.com> wrote:
I have replied a couple of times to the email address
n0body.h0me at inbox.com
with regards to this and had no reply. I am not sure if I have been
responding to the wrong address, but I am interested and would like to know
if my emails have been received.
Regards
Rob
--
~ UNIX is basically a simple operating system,
? ? ? ? ? ?but you have to be a genius to understand its simplicity. ~ dmr
-----Original Message-----
From: cctalk-bounces at classiccmp.org [mailto:cctalk-
bounces at classiccmp.org] On Behalf Of N0body H0me
Sent: 27 February 2012 06:47
To: cctalk at classiccmp.org
Subject: uVax II / III boards offered
I'm divesting myself of most of my q-bus stuff, starting with the uVax
board
sets.
M7169 - ?4-plane video controller module
M7168 - ?4-plane color bitmap module (x2)
M7622 - ?16-Mbyte RAM for KA650 (MicroVAX III) (x2)
M7625 - ?MicroVAX III CPU (workstation license), 60nS M7606-EF Microvax II
CPU
M7609 - ?8-Mbyte parity 36-bit RAM for KA630 (MicroVAX II) (x2)
I also have the cable for the video card, and a couple of those switch
panels
for the CPU's
I just need to unload this, make me an offer; would prefer to sell the
lot. ?I
could also be bribed to ship this
internationally; make me a good offer,
and
maybe we can cut a deal.
Shipping will be from STockton, CA 95212 (USA)
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
12:46 p.m.
I have replied a couple of times to the email address
n0body.h0me at inbox.com with regards to this and had no reply. I am
not sure if I have been responding to the wrong address, but I am
interested and would like to know if my emails have been received.
I sent mail too and haven't heard back either. The list seems to
impose its own Reply-To: header; I wonder if the sender put a
nonworking address in the From: and something useful in the Reply-To:
for some reason, and the latter got lost "thanks" to the list....
/~\ The ASCII Mouse
\ / Ribbon Campaign
X Against HTML mouse at rodents-montreal.org
/ \ Email! 7D C8 61 52 5D E7 2D 39 4E F1 31 3E E8 B3 27 4B
3:26 p.m.
I apologize for creating disorder here-- tentatively,
the boards have been claimed; the original person
who expressed interest isn't answering my e-mails,
and this caused things to stall a bit, so I have
offered them to the next person.
Sorry guys, didn't intend to be flakey. . . .
Jeff
-----Original Message-----
From: mouse at rodents-montreal.org
Sent: Thu, 1 Mar 2012 15:46:12 -0500 (EST)
To: cctalk at classiccmp.org
Subject: Re: uVax II / III boards offered
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
I have replied a couple of times to the email
address
n0body.h0me at inbox.com with regards to this and had no reply. I am
not sure if I have been responding to the wrong address, but I am
interested and would like to know if my emails have been received.
I sent mail too and haven't heard back either. The list seems to
impose its own Reply-To: header; I wonder if the sender put a
nonworking address in the From: and something useful in the Reply-To:
for some reason, and the latter got lost "thanks" to the list....
/~\ The ASCII Mouse
\ / Ribbon Campaign
X Against HTML mouse at rodents-montreal.org
/ \ Email! 7D C8 61 52 5D E7 2D 39 4E F1 31 3E E8 B3 27 4B
8:36 p.m.
I am going through my q-bus and micro-vax boards and have most CPU,
memory, interface and comm boards. I'll try to put a list togother a
list with cost next week, and am willing to ship overseas via USPS and
FED-EX air.
Also Lots of non-DEC- Dilog, etc
Please contact me off list
Finally unpacking a few more things!!!!
Paul
On 3/1/12, N0body H0me <n0body.h0me at inbox.com> wrote:
I apologize for creating disorder here-- tentatively,
the boards have been claimed; the original person
who expressed interest isn't answering my e-mails,
and this caused things to stall a bit, so I have
offered them to the next person.
Sorry guys, didn't intend to be flakey. . . .
Jeff
-----Original Message-----
From: mouse at rodents-montreal.org
Sent: Thu, 1 Mar 2012 15:46:12 -0500 (EST)
To: cctalk at classiccmp.org
Subject: Re: uVax II / III boards offered
____________________________________________________________
Publish your photos in seconds for FREE
TRY IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if4
I have replied a couple of times to the email
address
n0body.h0me at inbox.com with regards to this and had no reply. I am
not sure if I have been responding to the wrong address, but I am
interested and would like to know if my emails have been received.
I sent mail too and haven't heard back either. The list seems to
impose its own Reply-To: header; I wonder if the sender put a
nonworking address in the From: and something useful in the Reply-To:
for some reason, and the latter got lost "thanks" to the list....
/~\ The ASCII Mouse
\ / Ribbon Campaign
X Against HTML mouse at rodents-montreal.org
/ \ Email! 7D C8 61 52 5D E7 2D 39 4E F1 31 3E E8 B3 27 4B 
2 Mar
2 Mar
8 a.m.
New subject: DEC H960 Rack Connecting Brackets
I have a few of those filler strips ...
The dimension that Paul gives is correct.
If you look at the end of such a filler strip, it has the shape of a "+",
but one side is a bit longer (+--). They are black, either made of plastic
(the ones I have) or black painted metal (seen just once!).
I guess the difference between the front filler and rear filler strip
is the length a small part of one side of the "+" is cut out. The short end
is on the outside, the longer end "points" toward the middle of the rack.
Maybe I will use the filler strips in the future. The problem with racks
bolted together is that they become a PITA to roll if you need to be
at the rear side. My systems all stand against a wall. If I ever get a
lot of room (...) the systems can stand free in the open space. Then
it sure is nice to have those filler strips installed.
Installation is easy: just two bolts at each end (top & bottom) of the
filler strip.
Sorry, never took pictures of them.
Given the size (approx 1.9 m long) they are not easy to ship either.
- Henk.
--------------------------------------------------
From: "Paul Anderson" <useddec at gmail.com>
Sent: Friday, March 02, 2012 5:41 AM
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Subject: Re: DEC H960 Rack Connecting Brackets
There are two bars (about 6 ft long) less than an inch
wide and 2 or 3
inches deep.
The front and rear are different. I think 4 or 8 set screws were used
to hold everything together. You can bolt them together without the
filler strips and it will still look pretty nice.
Paul
On 3/1/12, paisley at erols.com <paisley at erols.com> wrote:
>
> I was able to get two H960 racks (Thanks Doc!) and what I am looking for
> now
> are the brackets that connect 2 racks together. Does any one have any of
> these? Or have a photo of what one looks like? Thanks.
>
> Todd Paisley
8:43 a.m.
New subject: DEC H960 Rack Connecting Brackets
I have put up 3 pics of them, these can be found at
http://www.groenenberg.net/download/jm/
They are more likely to be about 175cm than 190cm, but that's a small
detail.
I happen to have 8 of them, 5 plastic ones and 3 metal ones.
Ed
I have a few of those filler strips ...
The dimension that Paul gives is correct.
If you look at the end of such a filler strip, it has the shape of a "+",
but one side is a bit longer (+--). They are black, either made of plastic
(the ones I have) or black painted metal (seen just once!).
I guess the difference between the front filler and rear filler strip
is the length a small part of one side of the "+" is cut out. The short
end
is on the outside, the longer end "points" toward the middle of the rack.
Maybe I will use the filler strips in the future. The problem with racks
bolted together is that they become a PITA to roll if you need to be
at the rear side. My systems all stand against a wall. If I ever get a
lot of room (...) the systems can stand free in the open space. Then
it sure is nice to have those filler strips installed.
Installation is easy: just two bolts at each end (top & bottom) of the
filler strip.
Sorry, never took pictures of them.
Given the size (approx 1.9 m long) they are not easy to ship either.
- Henk.
--------------------------------------------------
From: "Paul Anderson" <useddec at gmail.com>
Sent: Friday, March 02, 2012 5:41 AM
To: "General Discussion: On-Topic and Off-Topic Posts"
<cctalk at classiccmp.org>
Subject: Re: DEC H960 Rack Connecting Brackets
--
Dit is een HTML vrije email / This is an HTML free email.
Zeg NEE tegen de 'slimme' meter.
There are two bars (about 6 ft long) less than an
inch wide and 2 or 3
inches deep.
The front and rear are different. I think 4 or 8 set screws were used
to hold everything together. You can bolt them together without the
filler strips and it will still look pretty nice.
Paul
On 3/1/12, paisley at erols.com <paisley at erols.com> wrote:
>
> I was able to get two H960 racks (Thanks Doc!) and what I am looking
> for
> now
> are the brackets that connect 2 racks together. Does any one have any
> of
> these? Or have a photo of what one looks like? Thanks.
>
> Todd Paisley
3:12 p.m.
New subject: DEC H960 Rack Connecting Brackets
Thanks guys for the info and photos. I at least know what I should be
looking for. If anyone has a set, I would be very interested!
Todd.
I have put up 3 pics of them, these can be found at
http://www.groenenberg.net/download/jm/
They are more likely to be about 175cm than 190cm, but that's a small
detail.
I happen to have 8 of them, 5 plastic ones and 3 metal ones.
Ed
4629
days inactive
4633
days old
14 comments
9 participants
participants (9)
-
henk.gooijen＠hotmail.com -
mouse＠Rodents-Montreal.ORG -
n0body.h0me＠inbox.com -
paisley＠erols.com -
quapla＠xs4all.nl -
robert.jarratt＠ntlworld.com -
rodsmallwood＠btconnect.com -
sander.reiche＠gmail.com -
useddec＠gmail.com