11 Dec
2015
11 Dec
'15
12:42 p.m.
Which one?
I have never found the config and IA software for the 10343B version
which attaches to a 10269C General Purpose Probe Interface.
Dang. Yes. That one.
The standalone E2423A version is the same thing as the
FuturePlus FS2230.
https://web.archive.org/web/20001005102542/http://www.futureplus.com/downlo…
https://web.archive.org/web/20001005102542/http://www.futureplus.com/downlo…
https://web.archive.org/web/20001005102542/http://www.futureplus.com/downlo…
Oh, thanks! If I can get the inverse assembler for this one, then I can probably create a
config for the HP 10343 hardware to make it work! You may have solved the biggest part of
my problem.
Marc
11 Dec
11 Dec
1:13 p.m.
On Fri, Dec 11, 2015 at 12:42 PM, Marc Verdiell <marc.verdiell at gmail.com> wrote:
Oh, thanks! If I can get the inverse assembler for this one, then I can probably create a
config for the HP 10343 hardware to make it work! You may have solved the biggest part of
my problem.
Marc
Comparing between the manuals for the 10343B and the E2433A the STAT
bits don't have quite the same layout between the two preprocessors.
Depending on how the IAs use the STAT bits I don't know if you could
get the E2433A / FS2230 IA to work correctly with the 10343B. I've
never tried it myself.
A scan of the 10343B manual is available here just in case you don't
already have it:
http://www.bitsavers.org/pdf/hp/te/logic_analyzer_preprocessors/10343-90901…
It would be nice if a copy of the config and IA disk for the 10343B
turned up somewhere. I've been keeping an eye out for one and haven't
seen one yet.
3299
days inactive
3299
days old
1 comments
2 participants
participants (2)
-
glen.slick＠gmail.com -
marc.verdiell＠gmail.com