Wanted: jumper settings for Teac FD-235HF-101 - test-drb@ccmp.vtda.org

24 Aug 1999

--- Tony Duell &lt;ard(a)p850ug1.demon.co.uk&gt; wrote:
...
  > > Silly suggestion. Have you tried linking pin
16 on the drive to the drive
 > > select line (pin 14 most likely). Leave the drive select wire connected 
 > > there as well. So that the motor goes on whenever the drive is selected.

Based on the depth of the ongoing discussion, I gave this a try.  I works!

...
  In any case, blowing a transistor is a lot less of a
problem than blowing 
 a custom chip. 
The transistor is on the Amiga (which I was using for schematic examples); this
drive is going on bizzaro PC device.

...
  I've forgotten what you're trying to do, but
what happens if you just 
 match up signal names as above? 
I'm trying to make a cable to hook up floppy drive to a proprietary DB-25
external connector on a sealed PeeCeeoid.

Thanks for the help!

-ethan

===
Infinet has been sold.  The domain is going away.  Please
send all replies to 

  erd(a)iname.com
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com