25 Dec
2013
25 Dec
'13
6:25 p.m.
Hello
I have an Amiga 4000 040 with what I think is a fouled up power supply. I
am looking for info as to what voltages should be where so i can determine
if the PSU is the problem. Any help is very much appreciated.
Thanks
Joe
27 Dec
27 Dec
3:14 p.m.
On Wed, Dec 25, 2013 at 09:25:16PM -0500, Joe Giliberti wrote:
I have an Amiga 4000 040 with what I think is a fouled
up power supply. I am
looking for info as to what voltages should be where so i can determine if
the PSU is the problem. Any help is very much appreciated.
I have full schematics for the A4000 *somewhere* in my teetering pile of
outstanding paperwork and Fine Legacy Equipment. At some point I should sort
through it, but I'm trying to put it off for a while longer...
How urgent is this?
3:38 p.m.
I'd hate to put off anyone elses procrastinating like it's my own but it
appears the Amiga 4000 uses pretty standard voltages. +12, -12, +5.
http://www.ianstedman.co.uk/Amiga/amiga_hacks/Amiga_Power_supplies/body_ami…
that several folks have modded an ATX power supply to work with their
4000.
On Fri, Dec 27, 2013 at 5:14 PM, Peter Corlett <abuse at cabal.org.uk> wrote:
On Wed, Dec 25, 2013 at 09:25:16PM -0500, Joe
Giliberti wrote:
I have an Amiga 4000 040 with what I think is a
fouled up power supply.
I am
looking for info as to what voltages should be
where so i can determine
if
the PSU is the problem. Any help is very much
appreciated.
I have full schematics for the A4000 *somewhere* in my teetering pile of
outstanding paperwork and Fine Legacy Equipment. At some point I should
sort
through it, but I'm trying to put it off for a while longer...
How urgent is this?
4:28 p.m.
On Fri, Dec 27, 2013 at 6:38 PM, Sam O'nella <barythrin at gmail.com> wrote:
I'd hate to put off anyone elses procrastinating
like it's my own but it
appears the Amiga 4000 uses pretty standard voltages. +12, -12, +5.
http://www.ianstedman.co.uk/Amiga/amiga_hacks/Amiga_Power_supplies/body_ami…
that several folks have modded an ATX power supply to work with their
4000.
I did that many years ago when I purchased a NZ A4000 so I could use
it in the States.
I chose to migrate the cable from the C= PSU to a PC PSU that happened
to fit in the C= enclosure, but I know of others who made external
adapter cables.
-ethan
4:49 p.m.
On Fri, 27 Dec 2013, Sam O'nella wrote:
I'd hate to put off anyone elses procrastinating
like it's my own but it
appears the Amiga 4000 uses pretty standard voltages. +12, -12, +5.
that several folks have modded an ATX power supply to
work with their
4000.
With a little luck, you should be able to fit the guts from an ATX supply
into the Amiga supply enclosure. I did that several years ago. A bit of
a pain, but it works reliably.
--
3:42 p.m.
Not urgent. Whenever it is convenient for you. Thank you!
On Dec 27, 2013 6:23 PM, "Peter Corlett" <abuse at cabal.org.uk> wrote:
On Wed, Dec 25, 2013 at 09:25:16PM -0500, Joe
Giliberti wrote:
I have an Amiga 4000 040 with what I think is a
fouled up power supply.
I am
looking for info as to what voltages should be
where so i can determine
if
the PSU is the problem. Any help is very much
appreciated.
I have full schematics for the A4000 *somewhere* in my teetering pile of
outstanding paperwork and Fine Legacy Equipment. At some point I should
sort
through it, but I'm trying to put it off for a while longer...
How urgent is this?
3794
days inactive
3796
days old
5 comments
5 participants
participants (5)
-
abuse＠cabal.org.uk -
barythrin＠gmail.com -
ethan.dicks＠gmail.com -
snhirsch＠gmail.com -
starbase89＠gmail.com