27 Jun
2003
27 Jun
'03
10:15 a.m.
I'm getting sick of my DSL modem locking up on me. Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if the
firewall is down. The question is, what would it take to get that Firewall
to powercycle the ()#*&% #(*&% modem on it's own? I seem to recall seeing
something that can be plugged into a Serial port, and you can send it
signals to turn the power on and off on a receptical.
Zane
27 Jun
27 Jun
10:33 a.m.
Zane, have your firewall interface a X-10 controller. The power module
could be used to cycle the modem.
g.
On Fri, 27 Jun 2003, Zane H. Healy wrote:
I'm getting sick of my DSL modem locking up on me.
Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if the
firewall is down. The question is, what would it take to get that Firewall
to powercycle the ()#*&% #(*&% modem on it's own? I seem to recall seeing
something that can be plugged into a Serial port, and you can send it
signals to turn the power on and off on a receptical.
Zane
12:33 p.m.
I used to have a BBS system that needed to be periodically reset. I just
got one of those digital clock-timers from Radio Shack, which you plug
in to the wall, and you can plug things into them and set an on/off
time. I set the ON time to 4:01 AM and the OFF time to 4:00 AM. So at
4:00 it would go off, then back on at 4:01. Worked great.
- Bob
-----Original Message-----
From: cctalk-admin(a)classiccmp.org [mailto:cctalk-admin@classiccmp.org]
On Behalf Of Gene Buckle
Sent: Friday, June 27, 2003 6:35 PM
To: cctalk(a)classiccmp.org
Subject: Re: Device to reset power...
Zane, have your firewall interface a X-10 controller. The power module
could be used to cycle the modem.
g.
On Fri, 27 Jun 2003, Zane H. Healy wrote:
I'm getting sick of my DSL modem locking up on me.
Some times it will
be good for weeks on end, other times it needs to be
powercycled every
few hours. This seems to be one of those every few
hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if
the firewall is down. The question is, what would it take to get that
Firewall to powercycle the ()#*&% #(*&% modem
on it's own? I seem to
recall seeing something that can be plugged into a Serial port, and
you can send it signals to turn the power on and off on a receptical.
Zane
29 Jun
29 Jun
10:21 p.m.
I take it the software didn't hold files open. *My* old BBS software
opened and closed files as needed, and was slightly slower than my friends
software (my evil competitor at the time) which opened all the files on
startup and kept them open.
Can you say file corruption? Sure you can... and *HE* was the
professional programmer... (:
Take Care,
Mark
At 20:29 27/06/2003 -0400, you wrote:
I used to have a BBS system that needed to be
periodically reset. I just
got one of those digital clock-timers from Radio Shack, which you plug
in to the wall, and you can plug things into them and set an on/off
time. I set the ON time to 4:01 AM and the OFF time to 4:00 AM. So at
4:00 it would go off, then back on at 4:01. Worked great.
- Bob
[---------]
"Homer, we don't have to have sex."
"Yes we do, the cookie told me so."
"Deserts aren't always right Homer."
"But they're so delicious."
Website: retrobbs.org
BBS: telnet bbs.retrobbs.org 2323
Tradewars: telnet tradewars.retrobbs.org
[---------]
27 Jun
27 Jun
11:02 a.m.
APC Masterswitch.... new, about $395, but they are on ebay much cheaper.
However, they are rackmountable, and have 8 outlets, wonderful web
interface, and a serial port. The serial port is designed for a console, but
I'm sure you could fudge the appropriate strings to make it shut a given
port down.
We use them like candy in our datacenter.
Jay
----- Original Message -----
From: "Zane H. Healy" <healyzh(a)aracnet.com>
To: <cctalk(a)classiccmp.org>
Sent: Friday, June 27, 2003 5:11 PM
Subject: Device to reset power...
I'm getting sick of my DSL modem locking up on me.
Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if the
firewall is down. The question is, what would it take to get that
Firewall
to powercycle the ()#*&% #(*&% modem on
it's own? I seem to recall seeing
something that can be plugged into a Serial port, and you can send it
signals to turn the power on and off on a receptical.
Zane
2:18 p.m.
Hi, gang,
*********** REPLY SEPARATOR ***********
On 27-Jun-03 at 17:57 Jay West wrote:
APC Masterswitch.... new, about $395, but they are on
ebay much cheaper.
However, they are rackmountable, and have 8 outlets, wonderful web
interface, and a serial port. The serial port is designed for a console,
but I'm sure you could fudge the appropriate strings to make it shut a given
port down.
Yes, you can. I speak from experience, as I'm using two of them here. Probably one of
the single most useful devices ever invented in terms of datacenter hardware.
We use them like candy in our datacenter.
See? Jay knows even better than I do. ;-)
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Bruce Lane, Owner & Head Hardware Heavy,
Blue Feather Technologies -- http://www.bluefeathertech.com
ARS KC7GR (Formerly WD6EOS) since 12-77 -- kyrrin(a)bluefeathertech.com
"I'll get a life when someone demonstrates that it would be superior
to what I have now..." (Taki Kogoma, aka Gym Z. Quirk)
28 Jun
28 Jun
3:28 a.m.
On Fri, 27 Jun 2003, Jay West wrote:
APC Masterswitch.... new, about $395, but they are on
ebay much cheaper.
However, they are rackmountable, and have 8 outlets, wonderful web
interface, and a serial port. The serial port is designed for a console, but
I'm sure you could fudge the appropriate strings to make it shut a given
port down.
Nice! But the X-10 controllers are less than $100.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
27 Jun
27 Jun
11:51 a.m.
It is fairly easy to set my Firewall up to monitor and
determine if the
firewall is down. The question is, what would it take to get that
Firewall
to powercycle the ()#*&% #(*&% modem on
it's own?
APC BackUPS Pro. Simple one character commands over a serial interface
to control the load and monitor the mains status. I know a guy in Annapolis
Maryland that sells used ones relatively cheap (less than $100). I bought
six from him and they all work great. He had a stack of around 50 of them
back in March. They are heavy of course so shipping might make them too
expensive for you. Email me off list if you are interested and I'll give
you his particulars.
28 Jun
28 Jun
3:28 a.m.
On Fri, 27 Jun 2003, Bill Sudbrink wrote:
APC BackUPS Pro. Simple one character commands over a
serial interface
to control the load and monitor the mains status. I know a guy in Annapolis
Maryland that sells used ones relatively cheap (less than $100). I bought
six from him and they all work great. He had a stack of around 50 of them
back in March. They are heavy of course so shipping might make them too
expensive for you. Email me off list if you are interested and I'll give
you his particulars.
Nice! But the X-10 modules weigh a few ounces ;)
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
27 Jun
27 Jun
noon
I'm getting sick of my DSL modem locking up on me.
Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if the
firewall is down. The question is, what would it take to get that Firewall
to powercycle the ()#*&% #(*&% modem on it's own? I seem to recall seeing
something that can be plugged into a Serial port, and you can send it
signals to turn the power on and off on a receptical.
Can you toggle any line on any port (say one of the handshake lines on
the serial port (RTS, DTR) or one of the lines on a parallel port)? If
so, you could use it to drive a transistor and then a relay..
-tony
1:24 p.m.
I'm getting sick of my DSL modem locking up on me.
Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
X10 would be the easiest. For example, you can get a classic Radio Shack
"Plug n Power" controller running on a TRS-80 model 1 or an original Coco.
But, ...
if the entire reason for cycling power is to reset it, . . .
wouldn't it be possible to connect a reset cicrcuit in it, and trigger
THAT, instead of power cycling?
28 Jun
28 Jun
3:26 a.m.
On Fri, 27 Jun 2003, Zane H. Healy wrote:
I'm getting sick of my DSL modem locking up on me.
Some times it will be
good for weeks on end, other times it needs to be powercycled every few
hours. This seems to be one of those every few hours days :^(
It is fairly easy to set my Firewall up to monitor and determine if the
firewall is down. The question is, what would it take to get that Firewall
to powercycle the ()#*&% #(*&% modem on it's own? I seem to recall seeing
something that can be plugged into a Serial port, and you can send it
signals to turn the power on and off on a receptical.
I put together a little system like this for someone before. There are
several devices on the market that allow you to send X-10 codes via
serial. Here's one:
http://www.smarthome.com/1160.html
Here's one in kit form:
http://www.smarthome.com/1150.html
I can't find the website for the one I used, but the one referenced above
is very nice. You'll need an X-10 AM466 Appliance Module to plug the
modem into.
You'll need to write some sort of script on your firewall. I wrote one in
Perl that pings a known good site. It allows a couple retries at a
configurable interval before it goes ahead and power cycles the modem.
Let me know if you want it and I'll send you the script. It's very brief
and uses the pretty poorly designed Device::Serial Perl library.
--
Sellam Ismail Vintage Computer Festival
------------------------------------------------------------------------------
International Man of Intrigue and Danger http://www.vintage.org
* Old computing resources for business and academia at www.VintageTech.com *
7807
days inactive
7810
days old
11 comments
10 participants
participants (10)
-
ard＠p850ug1.demon.co.uk -
bob_lafleur＠technologist.com -
cisin＠xenosoft.com -
geneb＠deltasoft.com -
healyzh＠aracnet.com -
jwest＠classiccmp.org -
kyrrin＠bluefeathertech.com -
nedry＠mail.bedlambells.com -
vcf＠siconic.com -
wh.sudbrink＠verizon.net