Not really. The smallest box (available from DEC) into which one could place a PDP-11 was the Shoebox (SB-11, or BA11-VA, if I remember correctly) which was about a foot wide and about 9 inches deep. It had a 4slot backplane (4x2, Q, AB side only) and a power supply. This was enough to put together a CPU (11/2, KDF11-A, KDJ11-A), memory, serial lines, bootstrap (MXV11-B), network card (DEQNA or DELQA) and a disk interface (RQDX3). It was not meant for housing the actual disk.. that would have to be another box. Megan Gentry Former RT-11 Developer +--------------------------------+-------------------------------------+ | Megan Gentry, EMT/B, PP-ASEL,ST| email: mbg at world.std.com | | Member of Technical Staff | megan at savaje.com | | SavaJe Technologies, Inc. | (s/ at /@/) | | 100 Apollo Drive | URL: http://world.std.com/~mbg/ | | Chelmsford, MA 01824 | "pdp-11 programmer - some assembler | | (978) 256 6521 (DEC '77-'98) | required." - mbg KB1FCA | +--------------------------------+-------------------------------------+