My VT-50 just sits on the stand. There is a small lip (about 1/4") around the sides that the terminal sits in. --barrym On Fri, Feb 22, 2019, 21:11 Marc Howard via cctech, <cctech at classiccmp.org> wrote:

Marc, The bottom side has _5_ feet with casters. On the top side is a metal plate attached, but it is not flat. It is sort of curved to the center to make the plate sturdy. The VT52 is mounted on that plate with (IIRC) 8 screws. The screws go into the base of the VT52. The screws are located at the 4 corners and in the middle of each side. Henk, PA8PDP ________________________________ Van: cctech <cctech-bounces at classiccmp.org> namens Marc Howard via cctech <cctech at classiccmp.org> Verzonden: Saturday, February 23, 2019 5:10:04 AM Aan: General Discussion: On-Topic Posts Only Onderwerp: VT52 stand Does anyone on the list have or have seen the stand that DEC sold with the VT52? I'm just curious; does the stand screw into holes on the monitor or does it just sit on top? top that is the correct size. Thanks, Marc