12 Jan
2014
12 Jan
'14
9:37 a.m.
On Sat, 11 Jan 2014 16:14:31 -0800, "Mark J. Blair" <nf6x at nf6x.net>
wrote:
[snip]
* I'm having trouble finding 1" wide paper tape for my machine. It came with a
small bit of black paper tape, and I see a single expensive roll of dark-colored 1"
tape on eBay. I'd like to get a few rolls of plain old oiled paper tape in 1"
width with a 2" core. There are several listings for narrower tape on eBay, but
I'm not seeing the 1" width that I need. I'm looking forward to filling that
chad box...
* Last, but not least, I will naturally need a suitable computer such as a PDP-8 to go
with it! :)
[snip]
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
Mark,
Try westnc.com at http://www.westnc.com/paper-tape-rolls.html#tty for
papertape. They have both oiled & unoiled 1-inch paper tape, but
recommend the oiled tape for ASR 33s. A 1/4 case of oiled papertape
(7 each 1000-foot rolls) may be affordable to you at $92 plus
shipping. (And they have rolls of paper for the Teletype's printer
too at $112 for a case of 12 rolls, plus shipping.)
Good luck on finding a PDP-8 to go with it though. :)
Bob
12 Jan
12 Jan
10:15 a.m.
On Jan 12, 2014, at 09:37 , Bob Vines <bobvines00 at gmail.com> wrote:
Try westnc.com at
http://www.westnc.com/paper-tape-rolls.html#tty for
papertape. They have both oiled & unoiled 1-inch paper tape, but
recommend the oiled tape for ASR 33s. A 1/4 case of oiled papertape
(7 each 1000-foot rolls) may be affordable to you at $92 plus
shipping. (And they have rolls of paper for the Teletype's printer
too at $112 for a case of 12 rolls, plus shipping.)
I had found their page in a search, and was considering ordering a quarter case from them.
I figured I'd try to hold out a bit longer to see if a less expensive source comes
along, but patience is a virtue that I don't have much of... :)
Good luck on finding a PDP-8 to go with it though. :)
I've seen a few PDP-8/E machines drift by on eBay since I started looking, but they
were priced above my pain threshold. Will a cheaper one find me? Will I break down and
sell a few kidneys (not my own, of course) to fund it? I may lash the 33 up to my
PDP-11/44 project, but that will be a bit of a mismatch. Maybe an early PDP-11 would be
appropriate, but I don't expect one of those to be cheaper than a comparable PDP-8.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
10:20 a.m.
New subject: Papertape Source
On 1/12/14 10:15 AM, Mark J. Blair wrote:
I had found their page in a search, and was
considering ordering a quarter case from them. I figured I'd try to hold out a bit
longer to see if a less expensive source
Will Donzelli should have some, I think you know him :-)
11:01 a.m.
New subject: Papertape Source
On Jan 12, 2014, at 10:20 , Al Kossow <aek at bitsavers.org> wrote:
On 1/12/14 10:15 AM, Mark J. Blair wrote:
Thanks! I don't know why I didn't think to ask him.
--
Mark J. Blair, NF6X <nf6x at nf6x.net>
http://www.nf6x.net/
I had found their page in a search, and was
considering ordering a quarter case from them. I figured I'd try to hold out a bit
longer to see if a less expensive source
Will Donzelli should have some, I think you know him :-) 
5 Feb
5 Feb
6:48 p.m.
New subject: Papertape Source
Yes, I finally dug it up - a full case of 28 rolls, all smelly with
oil, the way we like them. I am thinking ten bucks a roll. I will
probably keep 5 or so for myself.
--
Will in 10512
On Sun, Jan 12, 2014 at 1:20 PM, Al Kossow <aek at bitsavers.org> wrote:
On 1/12/14 10:15 AM, Mark J. Blair wrote:
I had found their page in a search, and was
considering ordering a quarter
case from them. I figured I'd try to hold out a bit longer to see if a less
expensive source
Will Donzelli should have some, I think you know him :-)
3923
days inactive
3948
days old
5 comments
4 participants
participants (4)
-
aek＠bitsavers.org -
bobvines00＠gmail.com -
nf6x＠nf6x.net -
wdonzelli＠gmail.com