This is quite a neat idea... ! > The PSU occupies the space at the back of the terminal, but ! > only extends halfway forward, so there is space underneath ! > the flare of the tube of 10"W x 4.75"H x 5"D. Of course ! > you'd not want to disrupt the picture. (Memo to self: must ! > sort out vertical linearity on mine!) ! > ! > At the back right hand side (again, as you look at the picture), ! > underneath the high tension wire to the tube, there is a space 4"W x ! > 3.5"H x 5"D. ! ! Sounds like I need to either find a smaller PowerSupply, or ! else I'm going to have to have it external to the system ! (which I don't want). What about taking the power supply out of the metal case? (Re)build a power supply to fit? Also, I have seen some pretty small ATX power supplies. about 1/2 to 2/3 the size of an AT PSU... --- David A Woyciesjes --- C & IS Support Specialist --- Yale University Press --- mailto:david.woyciesjes@yale.edu --- (203) 432-0953 --- ICQ # - 905818