19 Nov
2012
19 Nov
'12
11:59 p.m.
Just FYI:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=4337
There are some Pictures of uVAXII processor boards, and pics of the east
German and the Russian uVAX Processors at thew end of that thread.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
20 Nov
20 Nov
1:17 a.m.
On Tue, 20 Nov 2012, Holm Tiffe wrote:
Just FYI:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=4337
There are some Pictures of uVAXII processor boards, and pics of the east
German and the Russian uVAX Processors at thew end of that thread.
Sadly it seems to be one of those web forums where you have to register
first to see any of it.
Regards
--
Jacob Dahl Pind | telefisk.org | fidonet 2:230/38.8
5:04 a.m.
rachael at telefisk.org wrote:
On Tue, 20 Nov 2012, Holm Tiffe wrote:
Ok, you are right. This was in a ebay category from this forum where the
direct access is prohibited if you aren't logged in. Sorry, my fault.
In the other categories (besides of "ebay" "Internals" and
"Test") the
access is granted. I forgot about that.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
Just FYI:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=4337
There are some Pictures of uVAXII processor boards, and pics of the east
German and the Russian uVAX Processors at thew end of that thread.
Sadly it seems to be one of those web forums where you have to register
first to see any of it.
Regards
--
Jacob Dahl Pind | telefisk.org | fidonet 2:230/38.8 
1:59 a.m.
Bad Link
1. In German
2. Asks for username and password
Regards
?
Rod Smallwood
?
?????ANSI X12 - EANCOM - TRADACOMS
?
EDI Consulting Ltd
?
Phone? 0118 971 4436
Email?? rodsmallwood at btconnect.com
?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Holm Tiffe
Sent: 20 November 2012 08:00
To: cctalk at classiccmp.org
Subject: KA630 and Clones from behind the iron curtain
Just FYI:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=4337
There are some Pictures of uVAXII processor boards, and pics of the east
German and the Russian uVAX Processors at thew end of that thread.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
2:17 a.m.
What was shown basically in the thread was:
russian MicroVAXII-Board with Copro ??1807??4:
http://www.robotron-vax.de/K1820/M10_u80701_lowres.jpg
DEC-Original KA 630:
http://www.robotron-vax.de/K1820/7606_dec.jpg
eastern german ROBOTRON KAC20:
http://www.robotron-vax.de/K1820/k1820_zve_kac20_r.jpg
russian/ukrainian board (after 1991) for the system CM1702:
http://www.robotron-vax.de/K1820/cm1702_01.jpg
3:35 a.m.
Thank you very much for the direct links to the very nice images, Oliver? :)
-------------------------------------------------------------------------------
Pierre's collection of classic computers : http://classic-computing.dyndns.org/
----- Urspr?ngliche Message -----
Von: Oliver Lehmann <lehmann at ans-netz.de>
An: General Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
CC:
Gesendet: 11:17 Dienstag, 20.November 2012
Betreff: Re: KA630 and Clones from behind the iron curtain
What was shown basically in the thread was:
russian MicroVAXII-Board with Copro ??1807??4:
? http://www.robotron-vax.de/K1820/M10_u80701_lowres.jpg
DEC-Original KA 630:
? http://www.robotron-vax.de/K1820/7606_dec.jpg
eastern german ROBOTRON KAC20:
? http://www.robotron-vax.de/K1820/k1820_zve_kac20_r.jpg
russian/ukrainian board (after 1991) for the system CM1702:
? http://www.robotron-vax.de/K1820/cm1702_01.jpg
5:13 a.m.
Oliver Lehmann wrote:
What was shown basically in the thread was:
russian MicroVAXII-Board with Copro ??1807??4:
http://www.robotron-vax.de/K1820/M10_u80701_lowres.jpg
DEC-Original KA 630:
http://www.robotron-vax.de/K1820/7606_dec.jpg
eastern german ROBOTRON KAC20:
http://www.robotron-vax.de/K1820/k1820_zve_kac20_r.jpg
russian/ukrainian board (after 1991) for the system CM1702:
http://www.robotron-vax.de/K1820/cm1702_01.jpg
Here the links to the processor images aditionally:
The east german uVAXII Processor U80701 on a daughterboard:
http://www.robotron-vax.de/K1820/u80701_modul.jpg
Same as above but the russian FP-Coproc additionally in the background:
http://www.robotron-vax.de/K1820/u80701+kl1807bm4.jpg
Russian CPU on the left and Co on the right:
http://www.robotron-vax.de/K1820/kl1807vm3+4.jpg
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
5:08 a.m.
Rod Smallwood wrote:
Bad Link
1. In German
Do you think this is a bad link since the Forum is in german and you don't
understand taht language? Sorry, than this is your fault.
Nobody is preventing you for learning other languages.
What schould I say, I've never had english in a school (but hat russian)
and my natural language is german. Try to find some converters on the Net
if you can't read it dude, exactly like all not english readers on the
world are doing...
Regards,
Holm
2. Asks for username and password
Regards
?
Rod Smallwood
?
?????ANSI X12 - EANCOM - TRADACOMS
?
EDI Consulting Ltd
?
Phone? 0118 971 4436
Email?? rodsmallwood at btconnect.com
?
-----Original Message-----
From: cctech-bounces at classiccmp.org [mailto:cctech-bounces at classiccmp.org]
On Behalf Of Holm Tiffe
Sent: 20 November 2012 08:00
To: cctalk at classiccmp.org
Subject: KA630 and Clones from behind the iron curtain
Just FYI:
http://www.robotrontechnik.de/html/forum/thwb/showtopic.php?threadid=4337
There are some Pictures of uVAXII processor boards, and pics of the east
German and the Russian uVAX Processors at thew end of that thread.
Regards,
Holm
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
--
Technik Service u. Handel Tiffe, www.tsht.de, Holm Tiffe,
Freiberger Stra?e 42, 09600 Obersch?na, USt-Id: DE253710583
www.tsht.de, info at tsht.de, Fax +49 3731 74200, Mobil: 0172 8790 741
5:20 a.m.
On 20 November 2012 13:08, Holm Tiffe <holm at freibergnet.de> wrote:
Do you think this is a bad link since the Forum is in
german and you don't
understand taht language? Sorry, than this is your fault.
Nobody is preventing you for learning other languages.
What schould I say, I've never had english in a school (but hat russian)
and my natural language is german. Try to find some converters on the Net
if you can't read it dude, exactly like all not english readers on the
world are doing...
There are plenty of online tools that will translate it in any case.
--
Yoyodyne Propulsion Systems: "The Future Begins Tomorrow"
Visit us at: http://www.yoyodyne-propulsion.net
--------
"I'd like to hold off judgement on a thing like that, sir, until all
the facts are in. "
General "Buck" Turgidson
4415
days inactive
4415
days old
8 comments
6 participants
participants (6)
-
holm＠freibergnet.de -
john＠yoyodyne-propulsion.net -
lehmann＠ans-netz.de -
p.gebhardt＠ymail.com -
rachael＠telefisk.org -
rodsmallwood＠btconnect.com