8 Aug
2009
8 Aug
'09
1:29 a.m.
The one piece in my collection that is lacking documentation is my Data General
micronova MP/200. It has a 2901 based CPU, 16k or 64k dram memory,( 32x DG1100 DRAMS) and
loads of ECO wires.
Furthermore it has a DG6095-1 diskdrive. One fixed, one cartridge platter.
Is this a 5MB platter ( as previously indicated on this list ) or a 10 MB platter (as
indicated on a sticker on the device itself ).
So :
- any schematics out there ?
- any cartridges avaliable ( Europe...)
- from the farris website i deduced that Diablo 44 cartridges would fit . Correct?
- Formatting software available should I find some fitting cartridges ?
Jos
8 Aug
8 Aug
5:41 p.m.
Bruce Ray is an expert with DG Nova & Eclipse Documentation & Software
Archives.
Simulogics, www.simulogics.com Bruce Ray bkr at simulogics.com
----- Original Message -----
From: "Jos Dreesen" <jdr_use at bluewin.ch>
To: <cctalk at classiccmp.org>
Sent: Saturday, August 08, 2009 3:29 AM
Subject: DG MP200 / DG6095 info sought
The one piece in my collection that is lacking
documentation is my Data
General micronova MP/200. It has a 2901 based CPU, 16k or 64k dram
memory,( 32x DG1100 DRAMS) and loads of ECO wires.
Furthermore it has a DG6095-1 diskdrive. One fixed, one cartridge platter.
Is this a 5MB platter ( as previously indicated on this list ) or a 10 MB
platter (as indicated on a sticker on the device itself ).
So :
- any schematics out there ?
- any cartridges avaliable ( Europe...)
- from the farris website i deduced that Diablo 44 cartridges would fit .
Correct?
- Formatting software available should I find some fitting cartridges ?
Jos
9:33 p.m.
G'day Jos -
Congratulations on the MP/200 acquisition - it was a very unique design that
emulated the microNova and was the last product in the microNova series (all
previous DG designs used versions of the DG proprietary microNova chipset).
The 6095 is a 5MB fixed/5 MB removable disk drive that was used with
microNova products (and microEclipse products), and corresponds to the 6045
disks for the "standard" Nova and Eclipse systems. (DG used different
peripherals for its "micro" product line since the microNova I/O bus is
different than the "regular" Nova and Eclipse I/O bus. The disk pack sector
interleave value(s) may be different between the "standard" Nova/Eclipse
disk models and the microNova models.)
I believe the Diablo 44 disk packs were compatible but would have to verify
this.
Please contact me off-list at your convenience; I will research schematics
and other documentation. for you...
Bruce
bkr at WildHareComputers.com
Bruce Ray
Wild Hare Computer Systems, Inc.
...preserving the Data General legacy: www.NovasAreForever.com
----- Original Message -----
From: "Jos Dreesen" <jdr_use at bluewin.ch>
To: <cctalk at classiccmp.org>
Sent: Saturday, August 08, 2009 02:29 AM
Subject: DG MP200 / DG6095 info sought
The one piece in my collection that is lacking
documentation is my Data
General micronova MP/200. It has a 2901 based CPU, 16k or 64k dram
memory,( 32x DG1100 DRAMS) and loads of ECO wires.
Furthermore it has a DG6095-1 diskdrive. One fixed, one cartridge platter.
Is this a 5MB platter ( as previously indicated on this list ) or a 10 MB
platter (as indicated on a sticker on the device itself ).
So :
- any schematics out there ?
- any cartridges avaliable ( Europe...)
- from the farris website i deduced that Diablo 44 cartridges would fit .
Correct?
- Formatting software available should I find some fitting cartridges ?
Jos
5397
days inactive
5398
days old
2 comments
3 participants
participants (3)
-
bruce＠Wild-Hare.com -
ics65＠sbcglobal.net -
jdr_use＠bluewin.ch