Hi, On Tue, 8 Jan 2002 Fred Cisin wrote: See http://www.ece.nwu.edu/~cbachman/apple.html Using a Copy II Option Board (or Deluxe Option Board) and its supplied software you can create an image file of Apple II disks. Then use the program on that page convert to a plain disk image. [About the Option Board (earlier non-ASIC model): I'll volunteer to trace the PCB of one of these as part of an effort to figure out exactly how it works. But I only have Deluxe Option Board here at the moment, which uses an ASIC.] There are free programs (source available) for extracting files from and otherwise manipulating Apple disk images; one is AFID. Free software already exists on the Amiga for reading Apple disks, and transparently reading and writing MS-DOS disks. For reading Apple disks, use the disk2file program included in this archive (which also includes an Amiga executable of the AFID program): http://us.aminet.net/pub/aminet/misc/emu/Apple2000v13.readme http://us.aminet.net/pub/aminet/misc/emu/Apple2000v13.lha Versions 2.04 and later of the Amiga OS come with CrossDOS, which allows PC (and Atari ST) floppies to be accessed transparently. A comparable package which comes with source code is MSH: http://us.aminet.net/pub/aminet/misc/emu/msh_156.readme http://us.aminet.net/pub/aminet/misc/emu/msh_156.lha An Amiga with 5.25" drive can also read Commodore 1541-type disks. One free package (which from memory includes source code) requires that the disk motor be slowed down slightly, from 300rpm to about 280 (easy enough on Commodore A1020 5.25" drives, and non-Commodore disks are still readable at that speed). http://us.aminet.net/pub/aminet/misc/emu/1541.readme http://us.aminet.net/pub/aminet/misc/emu/1541.lha All in all, an old Amiga 500 or whatever costing about US$10 can be a good investment if you need to read "strange" disk formats. An Amiga 5.25" drive should cost about the same or a little more. -- Mark