14 Nov
2004
14 Nov
'04
8:27 a.m.
I have a friend who's needing a copy of RT-11 for an SMS1000, any help in
finding a copy would be appreciated.
This chap works at a fische and printshop and the 11/34 they used for
talking to their lasers kicked it, so they're going to replace it with an
SMS1000 they have on hand.
The guy says that the stock PDP11/34 RT-11 image won't run on the SMS1000,
so he's assuming a more specialised version is required.
Thanks all;
JP
14 Nov
14 Nov
8:53 a.m.
I have a friend who's needing a copy of RT-11 for
an SMS1000, any help in
finding a copy would be appreciated.
This chap works at a fische and printshop and the 11/34 they used for
talking to their lasers kicked it, so they're going to replace it with an
SMS1000 they have on hand.
The guy says that the stock PDP11/34 RT-11 image won't run on the SMS1000,
so he's assuming a more specialised version is required.
What version are they running? I've run standard RT-11 on a
SMS-1000. Either that or the version they currently have simply
needs setup for the SMS-1000. Keep in mind that the /34 is Unibus,
and the SMS-1000 is Q-Bus.
They probably need to talk to Mentec (http://www.mentec-inc.com/)
about getting a newer version than they're currently running from the
sounds of things. Since this is definitely for commercial use, you
can't simply find a copy somewhere.
Zane
--
--
| Zane H. Healy | UNIX Systems Administrator |
| healyzh(a)aracnet.com (primary) | OpenVMS Enthusiast |
| | Classic Computer Collector |
+----------------------------------+----------------------------+
| Empire of the Petal Throne and Traveller Role Playing, |
| PDP-10 Emulation and Zane's Computer Museum. |
| http://www.aracnet.com/~healyzh/ |
9:26 a.m.
This chap works
at a fische and printshop and the 11/34 they used for
talking to their lasers kicked it, so they're going to
replace it with an
>SMS1000 they have on hand. They probably need to talk to Mentec
(http://www.mentec-inc.com/)
about getting a newer version than they're currently running from the
sounds of things. Since this is definitely for commercial use, you
can't simply find a copy somewhere.
True. However, if the "fiche and printshop" replace
the broken 11/34 bits with working 11/34 bits, they'd
be fine, right?
All they need to do is find a bunch of people looking
to for a cheap fiche-to-good-quality-pdf scanning
service and they'd be sorted...
Antonio
--
---------------
Antonio Carlini arcarlini(a)iee.org
5:02 p.m.
This chap works at a fische and printshop and the 11/34
they used for
talking to their lasers kicked it, so they're going to
replace it with an
>SMS1000 they have on hand. They probably need to talk to Mentec
(http://www.mentec-inc.com/)
about getting a newer version than they're currently running from the
sounds of things. Since this is definitely for commercial use, you
can't simply find a copy somewhere.
True. However, if the "fiche and printshop" replace
the broken 11/34 bits with working 11/34 bits, they'd
be fine, right?
All they need to do is find a bunch of people looking
to for a cheap fiche-to-good-quality-pdf scanning
service and they'd be sorted...
5:07 p.m.
Excellent point! Geez, what was I thinking! The
parts to get the
/34 up and running are going to be *far* cheaper than the cost of
upgrading the software.
You should have been thinking either:
a. He's left off a smiley again
or
b. At least he didn't make some feeble joke
about a "fish and chip shop"
(See what you've made me do now? .. :-))
Antonio
--
---------------
Antonio Carlini arcarlini(a)iee.org
7343
days inactive
7344
days old
4 comments
3 participants
participants (3)
-
a.carlini＠ntlworld.com -
healyzh＠aracnet.com -
jplist＠kiwigeek.com