26 Mar
2015
26 Mar
'15
1:05 p.m.
I have a VAX 4000-300 that I want to pass on as I don't have room for it.
It is in a BA440 enclosure (marked VAX 4000-400). The CPU board had a
couple of problems, the levers that are used to push it into the slot have
been broken, however it will push into the slot OK and work. The onboard
Ethernet (SGEC) is also not working, but I have included a DESQA so you can
network it. It has 64MB of memory (2x 32MB). It also has a CXY08 board.
It does not have any disks because I want to keep the few DSSI disks I
have, however I will include two DSSI covers. You can still boot it as a
satellite of course. In fact I was toying with the idea of putting a
Raspberry Pi inside the enclosure with a crossover LAN cable and running if
off SIMH on that.
It is free, however I would appreciate a small donation, as it has cost me
money to collect it to save it from being dumped.
It is in the UK, in South Manchester. Although I am currently working a lot
in Coventry so could bring it to that area. I will also be at DEC Legacy in
Windermere 11-12 April, although I would prefer to leave room in my car for
the machines I want to exhibit, if possible.
Regards
Rob
29 Mar
29 Mar
5:45 p.m.
I have a running 4000/300, and these are a very nice machine - it's my
usual go-to VMS box. I hope someone picks it up and gives it some TLC!
On Thu, Mar 26, 2015 at 1:05 PM, Jarratt RMA <robert.jarratt at ntlworld.com>
wrote:
I have a VAX 4000-300 that I want to pass on as I
don't have room for it.
It is in a BA440 enclosure (marked VAX 4000-400). The CPU board had a
couple of problems, the levers that are used to push it into the slot have
been broken, however it will push into the slot OK and work. The onboard
Ethernet (SGEC) is also not working, but I have included a DESQA so you can
network it. It has 64MB of memory (2x 32MB). It also has a CXY08 board.
It does not have any disks because I want to keep the few DSSI disks I
have, however I will include two DSSI covers. You can still boot it as a
satellite of course. In fact I was toying with the idea of putting a
Raspberry Pi inside the enclosure with a crossover LAN cable and running if
off SIMH on that.
It is free, however I would appreciate a small donation, as it has cost me
money to collect it to save it from being dumped.
It is in the UK, in South Manchester. Although I am currently working a lot
in Coventry so could bring it to that area. I will also be at DEC Legacy in
Windermere 11-12 April, although I would prefer to leave room in my car for
the machines I want to exhibit, if possible.
Regards
Rob
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
10:53 p.m.
It has been claimed, so it is going to a good home.
Regards
Rob
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Ian S. King
Sent: 30 March 2015 01:45
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: VAX 4000-300 Available in the UK
I have a running 4000/300, and these are a very nice machine - it's my usual
go-to VMS box. I hope someone picks it up and gives it some TLC!
On Thu, Mar 26, 2015 at 1:05 PM, Jarratt RMA <robert.jarratt at ntlworld.com>
wrote:
I have a VAX 4000-300 that I want to pass on as I
don't have room for it.
It is in a BA440 enclosure (marked VAX 4000-400). The CPU board had a
couple of problems, the levers that are used to push it into the slot
have been broken, however it will push into the slot OK and work. The
onboard Ethernet (SGEC) is also not working, but I have included a
DESQA so you can network it. It has 64MB of memory (2x 32MB). It also has a
CXY08
board.
It does not have any disks because I want to keep the few DSSI disks I
have, however I will include two DSSI covers. You can still boot it as
a satellite of course. In fact I was toying with the idea of putting a
Raspberry Pi inside the enclosure with a crossover LAN cable and
running if off SIMH on that.
It is free, however I would appreciate a small donation, as it has
cost me money to collect it to save it from being dumped.
It is in the UK, in South Manchester. Although I am currently working
a lot in Coventry so could bring it to that area. I will also be at
DEC Legacy in Windermere 11-12 April, although I would prefer to leave
room in my car for the machines I want to exhibit, if possible.
Regards
Rob
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate The Information School
<http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org> Value
Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
30 Mar
30 Mar
7:20 p.m.
Thanks for passing that along, Rob! Cheers -- Ian
On Sun, Mar 29, 2015 at 10:53 PM, Robert Jarratt <
robert.jarratt at ntlworld.com> wrote:
It has been claimed, so it is going to a good home.
Regards
Rob
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Ian S.
King
Sent: 30 March 2015 01:45
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: VAX 4000-300 Available in the UK
I have a running 4000/300, and these are a very nice machine - it's my
usual
go-to VMS box. I hope someone picks it up and
gives it some TLC!
On Thu, Mar 26, 2015 at 1:05 PM, Jarratt RMA <
robert.jarratt at
ntlworld.com>
wrote:
> I have a VAX 4000-300 that I want to pass on as I don't have room for
it.
> It is in a BA440 enclosure (marked VAX
4000-400). The CPU board had a
> couple of problems, the levers that are used to push it into the slot
> have been broken, however it will push into the slot OK and work. The
> onboard Ethernet (SGEC) is also not working, but I have included a
> DESQA so you can network it. It has 64MB of memory (2x 32MB). It also
has a
CXY08 board.
Value
It does not have any disks because I want to keep the few DSSI disks I
have, however I will include two DSSI covers. You can still boot it as
a satellite of course. In fact I was toying with the idea of putting a
Raspberry Pi inside the enclosure with a crossover LAN cable and
running if off SIMH on that.
It is free, however I would appreciate a small donation, as it has
cost me money to collect it to save it from being dumped.
It is in the UK, in South Manchester. Although I am currently working
a lot in Coventry so could bring it to that area. I will also be at
DEC Legacy in Windermere 11-12 April, although I would prefer to leave
room in my car for the machines I want to exhibit, if possible.
Regards
Rob
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate The Information School
<http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org> Sensitive Design Research Lab
<http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
1 Apr
1 Apr
2:11 p.m.
The machine has now been collected, and is travelling to its new home in
good hands.
Thanks
Rob
On 31 March 2015 at 03:20, Ian S. King <isking at uw.edu> wrote:
Thanks for passing that along, Rob! Cheers -- Ian
On Sun, Mar 29, 2015 at 10:53 PM, Robert Jarratt <
robert.jarratt at ntlworld.com> wrote:
Value
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate
The Information School <http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org>
Value Sensitive Design Research Lab <http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
It has been claimed, so it is going to a good
home.
Regards
Rob
> -----Original Message-----
> From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of Ian
S.
King
I
Sent: 30 March 2015 01:45
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: VAX 4000-300 Available in the UK
I have a running 4000/300, and these are a very nice machine - it's my
usual
go-to VMS box. I hope someone picks it up and
gives it some TLC!
On Thu, Mar 26, 2015 at 1:05 PM, Jarratt RMA <
robert.jarratt at
ntlworld.com>
wrote:
> I have a VAX 4000-300 that I want to pass on as I don't have room for
it.
> It is in a BA440 enclosure (marked VAX
4000-400). The CPU board had a
> couple of problems, the levers that are used to push it into the slot
> have been broken, however it will push into the slot OK and work. The
> onboard Ethernet (SGEC) is also not working, but I have included a
> DESQA so you can network it. It has 64MB of memory (2x 32MB). It also
has a
> CXY08 board.
> >
> > It does not have any disks because I want to keep the few DSSI disks > > have, however I will include two DSSI
covers. You can still boot it
as
> > a satellite of course. In fact I was
toying with the idea of putting
a
> > Raspberry Pi inside the enclosure with
a crossover LAN cable and
> > running if off SIMH on that.
> >
> > It is free, however I would appreciate a small donation, as it has
> > cost me money to collect it to save it from being dumped.
> >
> > It is in the UK, in South Manchester. Although I am currently working
> > a lot in Coventry so could bring it to that area. I will also be at
> > DEC Legacy in Windermere 11-12 April, although I would prefer to
leave
room in my car for the machines I want to exhibit, if
possible.
Regards
Rob
--
Ian S. King, MSIS, MSCS, Ph.D. Candidate The Information School
<http://ischool.uw.edu>
Archivist, Voices From the Rwanda Tribunal <http://tribunalvoices.org> Sensitive Design Research Lab
<http://vsdesign.org>
University of Washington
There is an old Vulcan saying: "Only Nixon could go to China."
4017
days inactive
4023
days old
4 comments
2 participants
participants (2)
-
isking＠uw.edu -
robert.jarratt＠ntlworld.com