I have used ExpressPCB and the free layout software on two projects. The layout software is for Windows and does double sided boards only. This software emails the design to ExpressPCB so it is not general purpose. If a two layer board will meet your needs I recommend ExpressPCB. Their service is fast and the software is easy to use. http://www.expresspcb.com Two 10 by 10 boards with no solder mask are +ACQ-230 (+ACQ-70 setup, +ACQ-80 per board) with a 3 day delivery. Two 10 by 10 boards with silk screen and solder mask are +ACQ-370 (+ACQ-310 setup, +ACQ-27 per board) with a 10 day delivery Boards up to 5.25 by 4 with silk screen and solder mask are +ACQ-229 for 5 boards. The company also offers a full featured PCB board production service. Your boards are actually manufactured here. http://www.pcbexpress.com/ I have access to commercial grade design software (PADS PowerPCB) but it is very difficult to get up to speed on the full featured software if you are doing one design a year. If you mess up on producing your output files your boards are junk. It is difficult to make operator errors in the ExpressPCB software. (You can still route the trace to the wrong pin.) You can see my projects here: http://home.attbi.com/+AH4-swtpc6800/ Michael Holley www.swtpc.com ----- Original Message ----- From: +ACI-John Allain+ACI- +ADw-allain+AEA-panix.com+AD4- To: +ADw-classiccmp+AEA-classiccmp.org+AD4- Sent: Saturday, March 16, 2002 8:06 AM Subject: RFQ: boards drilled and undrilled +AD4- Request for quotation: +AD4- +AD4- If I wanted a, say, 10+ACI-x10+ACI- pcb made to order, +AD4- what would I expect to pay and what format +AD4- drawings would the maker take? +AD4- +AD4- John A. +AD4- +AD4-