2 Nov
2001
2 Nov
'01
8:17 p.m.
Anyone know where I might find the manual for a VT330 or VT340 online? I
am looking for configuration info and factory default settings and other
things of that nature. I would also appreciate it if someone could give
me pointers on my DECserver 700. Thanks a lot.
Peace... Sridhar
2 Nov
2 Nov
10:16 p.m.
http://vt100.net/docs/vt3xx-gp/contents.html
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org] On Behalf Of One Without Reason
Sent: Saturday, 03 November, 2001 05.18
To: Classic Computers Mailing List
Subject: VT330/VT340 Manual
Anyone know where I might find the manual for a VT330 or VT340 online?
I
am looking for configuration info and factory default settings and other
things of that nature. I would also appreciate it if someone could give
me pointers on my DECserver 700. Thanks a lot.
Peace... Sridhar
3 Nov
3 Nov
7:40 a.m.
That isn't it. That's how to graphics program in ReGIS. I need to know
how to configure my VT340.
Peace... Sridhar
On Sat, 3 Nov 2001, Fred deBros wrote:
http://vt100.net/docs/vt3xx-gp/contents.html
-----Original Message-----
From: owner-classiccmp(a)classiccmp.org
[mailto:owner-classiccmp@classiccmp.org] On Behalf Of One Without Reason
Sent: Saturday, 03 November, 2001 05.18
To: Classic Computers Mailing List
Subject: VT330/VT340 Manual
Anyone know where I might find the manual for a VT330 or VT340 online?
I
am looking for configuration info and factory default settings and other
things of that nature. I would also appreciate it if someone could give
me pointers on my DECserver 700. Thanks a lot.
Peace... Sridhar
12:39 p.m.
That isn't it. That's how to graphics program
in ReGIS.
I need to know how to configure my VT340.
FWIW, I would like to thank the sender.... Nice site!
BTW, there is a lot of cross compatibility between the
models, I would be very surprised if most vt320 config
(http://vt100.net/docs/vt320-uu/chapter4.html)
wouldn't work with the 340, especially conceptually.
Anything in particular that's difficult?
John A.
Ever configure a VT100? No menus!
5:02 p.m.
Well, conceptually, I would bet that most serial terminals with a
menu-driven setup system would have similar settings. That's a given. I
was just looking for an exact command reference. There are a couple of
things that are different between the 320 and the 330/340. One that comes
to mind is the CR/CRLF operation. Flow control... things like that.
Peace... Sridhar
On Sat, 3 Nov 2001, John Allain wrote:
That isn't
it. That's how to graphics program in ReGIS.
I need to know how to configure my VT340.
FWIW, I would like to thank the sender.... Nice site!
BTW, there is a lot of cross compatibility between the
models, I would be very surprised if most vt320 config
(http://vt100.net/docs/vt320-uu/chapter4.html)
wouldn't work with the 340, especially conceptually.
Anything in particular that's difficult?
John A.
Ever configure a VT100? No menus!
4 Nov
4 Nov
1:02 p.m.
John Allain skrev:
Ever configure a VT100? No menus!
We recently opened up a very old TEC terminal in order to give it a new power
cable. We were quite surprised at how primitive it was. The PCB was very hand-
drawn, with very smooth, organic lines, and didn't contain much more than an
Intel microcontroller. Setup? There was a bank of DIP switches under the
keyboard. I wonder if it will work.
Does anyone have any info on a TEC Datascreen?
--
En ligne avec Thor 2.6a.
Computer programmers know how to use their hardware.
8450
days inactive
8451
days old
5 comments
4 participants
participants (4)
-
allain＠panix.com -
fdebros＠verizon.net -
optimus＠canit.se -
vance＠ikickass.org