31 Jul
1999
31 Jul
'99
3:35 a.m.
All,
My apologies. Dayna's web site says "Farewell", and the intel site
to which it points gave it a good try but didn't answer the question. I
recently got a Dayna Etherprint-T Plus but not the power supply for it and
i have no idea what voltage or current it needs. I'm pretty sure the unit
is later than 1989 but if anybody has one and could check out the power
supply to see what it says and email me off-list, I'd appreciate it very
much. Thanks!
- Mark
31 Jul
31 Jul
9:14 p.m.
All,
My apologies. Dayna's web site says "Farewell", and the intel site
to which it points gave it a good try but didn't answer the question. I
recently got a Dayna Etherprint-T Plus but not the power supply for it and
i have no idea what voltage or current it needs. I'm pretty sure the unit
is later than 1989 but if anybody has one and could check out the power
supply to see what it says and email me off-list, I'd appreciate it very
much. Thanks!
- Mark
Here is a snip from a mac list I am on;
I've used the EtherPrint for about a year now with the 9V power supply and
it has worked without a hitch (at least as far as the PS is concerned).
Internally, the EtherPrint has a standard +5V regulator (7805 or
equivalent) connected to the external power supply. A 9V power supply will
power this with no problem. Anything more is just making more heat inside
the EtherPrint.
Clark Martin
Redwood City, CA, USA
Macintosh / Internet Consulting
clarkm(a)pacbell.net
9274
days inactive
9275
days old
1 comments
2 participants
participants (2)
-
mikeford＠netwiz.net -
mtapley＠swri.edu