14 Apr
2008
14 Apr
'08
8:34 p.m.
From the description of the resistor style, can anyone
tell
what the wattage might be?
A WW2 should be 2.4W. The wattage is n*1.2
Lee.
14 Apr
14 Apr
9:08 p.m.
On Tue, Apr 15, 2008 at 02:34:24AM +0200, Lee Davison wrote:
Excellent. Thank you. I think this will work perfectly (turns out I
copied the wrong spot from the spec sheet... it's 800mW, or 190mA @ 4.2V,
which means a 1W 4 Ohm would be all I need, but I _have_ the 2.4W resistors
in hand).
Thanks.
-ethan
--
Ethan Dicks, A-333-S Current South Pole Weather at 15-Apr-2008 at 00:40 Z
South Pole Station
PSC 468 Box 400 Temp -70.8 F (-57.1 C) Windchill -102.4 F (-74.7 C)
APO AP 96598 Wind 8.0 kts Grid 100 Barometer 682.5 mb (10534 ft)
Ethan.Dicks at usap.gov http://penguincentral.com/penguincentral.html
From the description of the resistor style, can
anyone tell
what the wattage might be?
A WW2 should be 2.4W. The wattage is n*1.2 
9:23 p.m.
Ethan Dicks wrote:
On Tue, Apr 15, 2008 at 02:34:24AM +0200, Lee Davison
wrote:
Excellent. Thank you.
Sure beats "test it until destruction, then back off a little" :-)
From the
description of the resistor style, can anyone tell
what the wattage might be?
A WW2 should be 2.4W. The wattage is n*1.2 
15 Apr
15 Apr
12:50 p.m.
Jules Richardson wrote:
Ethan Dicks wrote:
Well
He has plenty of ICE around for cooling. :)
On Tue, Apr 15, 2008 at 02:34:24AM +0200, Lee
Davison wrote:
Excellent. Thank you.
Sure beats "test it until destruction, then back off a little" :-) From the
description of the resistor style, can anyone tell
what the wattage might be?
A WW2 should be 2.4W. The wattage is n*1.2 
5:58 p.m.
Ethan Dicks wrote:
Isn;t that how you get the right torque on a deflection yoke clamp
screw? You know, tighten it until the CRT implodes then back off 1/4 of a
turn
:-)
-tony
On Tue, Apr 15, 2008 at 02:34:24AM +0200, Lee
Davison wrote:
Excellent. Thank you.
Sure beats "test it until destruction, then back off a little" :-) From the
description of the resistor style, can anyone tell
what the wattage might be?
A WW2 should be 2.4W. The wattage is n*1.2
5944
days inactive
5944
days old
4 comments
5 participants
participants (5)
-
ard＠p850ug1.demon.co.uk -
bfranchuk＠jetnet.ab.ca -
ethan.dicks＠usap.gov -
jules.richardson99＠gmail.com -
lee＠geekdot.com