12 Feb
2002
12 Feb
'02
9 a.m.
-----Original Message-----
From: James L. Rice [mailto:jrice@texoma.net]
Watch out for semiconducting tape. I had one
electrician working for
me, who wrapped all of the splices on a entire job with leftover
semiconducting tape. When we megged the leads, every one showed a
direct short to ground. The guy had over 20 years
experience, but was
in over his head on that one.
*ouch* I don't remember having seen semiconducting tape. Does it look
a lot like normal vinyl tape? :)
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
12 Feb
12 Feb
3:50 p.m.
On Tue, 12 Feb 2002, Christopher Smith wrote:
Sort of a diode strip perhaps?
- don
-----Original
Message-----
From: James L. Rice [mailto:jrice@texoma.net]
Watch out for semiconducting tape. I had one
electrician working for
me, who wrapped all of the splices on a entire job with leftover
semiconducting tape. When we megged the leads, every one showed a
direct short to ground. The guy had over 20 years
experience, but was
in over his head on that one.
*ouch* I don't remember having seen semiconducting tape. Does it look
a lot like normal vinyl tape? :)
Chris Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
4:58 p.m.
It looks like the normal soft rubber self fusing tape that is supposed
to cushion a tape splice. A lot of electricians will not cover the soft
rubber tape with some layers of vinyl tape on lower voltage splices
(under 5kv). Semiconducting tape is used diretly over the bare
conductor and splice of a high voltager splice (5kv and over). It
replaces the removed semiconducting insulation layer, and provides a
corona drain to the grounding strap of the stress cone.
Christopher Smith wrote:
-----Original
Message-----
From: James L. Rice [mailto:jrice@texoma.net]
Watch out for semiconducting tape. I had one
electrician working for
me, who wrapped all of the splices on a entire job with leftover
semiconducting tape. When we megged the leads, every one showed a
direct short to ground. The guy had over 20 years
experience, but was
in over his head on that one.
*ouch* I don't remember having seen semiconducting tape. Does it look
a lot like normal vinyl tape? :)
Chris
Christopher Smith, Perl Developer
Amdocs - Champaign, IL
/usr/bin/perl -e '
print((~"\x95\xc4\xe3"^"Just Another Perl
Hacker.")."\x08!\n");
'
.
8354
days inactive
8355
days old
2 comments
3 participants
participants (3)
-
csmith＠amdocs.com -
donm＠cts.com -
jrice＠texoma.net