28 May
2017
28 May
'17
4:38 p.m.
I have a bus backplane here, very similar to an S100 backplane but the 2x50 connectors use
.1 in spacing instead of .125 and the supply voltages are regulated +5 and +/- 12V.
I also have the power supply; what are they from?
TIA,
m
7:42 p.m.
----- Original Message -----
From: "Chuck Guzis via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Sunday, May 28, 2017 8:07 PM
Subject: Re: What is this bus?
On 05/28/2017 04:38 PM, Mike Stein via cctalk wrote:
https://photos.google.com/album/AF1QipOop48j6_DuxRHiq7Y-lcuxXw5rDVWhU_a0WjjH
I have a bus backplane here, very similar to an
S100 backplane but the 2x50 connectors use .1 in spacing instead of .125 and the supply
voltages are regulated +5 and +/- 12V.
Photo, please?
--Chuck
7:40 p.m.
404
it may be for a bus version of the pascal microengine
On 5/28/17 7:42 PM, Mike Stein via cctalk wrote:
----- Original Message -----
From: "Chuck Guzis via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Sunday, May 28, 2017 8:07 PM
Subject: Re: What is this bus?
On 05/28/2017 04:38 PM, Mike Stein via cctalk
wrote:
https://photos.google.com/album/AF1QipOop48j6_DuxRHiq7Y-lcuxXw5rDVWhU_a0WjjH
I have a bus backplane here, very similar to an
S100 backplane but the 2x50 connectors use .1 in spacing instead of .125 and the supply
voltages are regulated +5 and +/- 12V.
Photo, please?
--Chuck
8:12 p.m.
Sorry about that; not used to Google Photos replacing Picasa. Try this:
https://goo.gl/photos/oJ9kFzh5tHwraAf69
m
----- Original Message -----
From: "Al Kossow via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Sunday, May 28, 2017 10:40 PM
Subject: Re: What is this bus?
404
it may be for a bus version of the pascal microengine
On 5/28/17 7:42 PM, Mike Stein via cctalk wrote:
----- Original Message -----
From: "Chuck Guzis via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Sunday, May 28, 2017 8:07 PM
Subject: Re: What is this bus?
On 05/28/2017 04:38 PM, Mike Stein via cctalk
wrote:
https://photos.google.com/album/AF1QipOop48j6_DuxRHiq7Y-lcuxXw5rDVWhU_a0WjjH
I have a bus backplane here, very similar to an
S100 backplane but the 2x50 connectors use .1 in spacing instead of .125 and the supply
voltages are regulated +5 and +/- 12V.
Photo, please?
--Chuck
8:28 p.m.
On 5/28/2017 8:12 PM, Mike Stein via cctalk wrote:
Sorry about that; not used to Google Photos replacing
Picasa. Try this:
https://goo.gl/photos/oJ9kFzh5tHwraAf69
m
So no info on the brown box with the open frame supply? I don't see how
that assembly was done, since there does not appear to be room between
the back panel (power) and the power supply to place the board.
or if it is a perspective issue with the photo, the boards that would
fit in there would be 6" x 4" in size, I'd guess.
Appears to be heavier traces down one side, for power, I'm guessing.
The Pascal Microengine had a black and brushed aluminum package, so
isn't consistent with this being a backplane for that. But there were a
number of those sold around w/o enclosures.
Most of the options for the Microengine came out on connectors on the
back of the box, IIRC.
Thanks
Jim
9:06 a.m.
On 5/29/2017 8:38 AM, Al Kossow via cctalk wrote:
On 5/28/17 8:28 PM, jim stephens via cctalk wrote:
I
saw a lot of WD PME scrap here, even engineering stuff. The staff
shared a building with a friend, and some stuff I had came down the hall
The Pascal Microengine had a black and brushed
aluminum package
There was a bus version. I have cards, but no backplane. from there to scrap dealers.
I don't recall seeing anything that fit with what the guy had in the
photos here with the open frame supply. Could be for the PME, but would
maybe be a refugee prototype or such.
The offices which had some of the development was in Sky Park Circle in
Irvine, colocated with Technology Marketing, Inc.
Some financial people who had dealings with Microdata's founding owned
the building that had both TMI and the WD offices located there.
Albert Wong (IIRC) of the A in AST worked at TMI with a friend till the
ramp up of AST drew him in.
Thanks
Jim
10:13 a.m.
----- Original Message -----
From: "jim stephens via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Monday, May 29, 2017 12:06 PM
Subject: Re: What is this bus?
On 5/29/2017 8:38 AM, Al Kossow via cctalk wrote:
--------------------
FWIW, the power supply looks too professional/commercial to be part of a prototype; it
looks like it's meant to slide into its chassis/cabinet, with a handhold to allow
pulling it out and a spring-loaded latch to lock it into place.
But it's also quite possible that the PS and the backplane don't even belong
together.
On 5/28/17 8:28 PM, jim stephens via cctalk wrote:
I
saw a lot of WD PME scrap here, even engineering stuff. The staff
shared a building with a friend, and some stuff I had came down the hall
from there to scrap dealers.
I don't recall seeing anything that fit with what the guy had in the
photos here with the open frame supply. Could be for the PME, but would
maybe be a refugee prototype or such.
The offices which had some of the development was in Sky Park Circle in
Irvine, colocated with Technology Marketing, Inc.
Some financial people who had dealings with Microdata's founding owned
the building that had both TMI and the WD offices located there.
Albert Wong (IIRC) of the A in AST worked at TMI with a friend till the
ramp up of AST drew him in.
Thanks
Jim The Pascal Microengine had a black and brushed
aluminum package
There was a bus version. I have cards, but no backplane. 
30 May
30 May
4:28 a.m.
looks like STD Bus (
http://www.winsystems.com/wp-content/uploads/specs/std_section1.pdf)
On Mon, May 29, 2017 at 8:17 PM, Chuck Guzis via cctalk <
cctalk at classiccmp.org> wrote:
On 05/29/2017 10:13 AM, Mike Stein via cctalk wrote:
But it's also quite possible that the PS and
the backplane don't even
belong together.
^ This was my initial guess. It just looked wrong.
--Chuck
4:45 a.m.
On 5/30/17, 7:28 AM, "cctalk on behalf of Rico Pajarola via cctalk"
<cctalk-bounces at classiccmp.org on behalf of cctalk at classiccmp.org> wrote:
looks like STD Bus (
http://www.winsystems.com/wp-content/uploads/specs/std_section1.pdf)
What would give you that idea? Neither the number of pins, nor the spacing
of the connector as described in the initial post match...
2 Jun
2 Jun
11:24 a.m.
On Tue, May 30, 2017 at 1:45 PM, Camiel Vanderhoeven <
camiel.vanderhoeven at vmssoftware.com> wrote:
Should have looked closer before posting. The enclosure (if it is part of
it) reminded me of STD bus enclosures, but it's been a while since I've
seen one for real.
looks like STD
Bus (
http://www.winsystems.com/wp-content/uploads/specs/std_section1.pdf)
What would give you that idea? Neither the number of pins, nor the spacing
of the connector as described in the initial post match...
30 May
30 May
8:06 a.m.
----- Original Message -----
From: "Rico Pajarola via cctalk" <cctalk at classiccmp.org>
To: "Chuck Guzis" <cclist at sydex.com>; "General Discussion:
On-Topic and Off-Topic Posts" <cctalk at classiccmp.org>
Sent: Tuesday, May 30, 2017 7:28 AM
Subject: Re: What is this bus?
looks like STD Bus (
http://www.winsystems.com/wp-content/uploads/specs/std_section1.pdf)
On Mon, May 29, 2017 at 8:17 PM, Chuck Guzis via cctalk <
cctalk at classiccmp.org> wrote:
> On 05/29/2017 10:13 AM, Mike Stein via cctalk wrote:
>
> > But it's also quite possible that the PS and the backplane don't even
> > belong together.
>
> ^ This was my initial guess. It just looked wrong.
>
> --Chuck
>
-------------------
STD bus is smaller with 56 pins; this has 100.
29 May
29 May
9:08 a.m.
So is this backplane any use to you (or anyone) ?
----- Original Message -----
From: "Al Kossow via cctalk" <cctalk at classiccmp.org>
To: <cctalk at classiccmp.org>
Sent: Monday, May 29, 2017 11:38 AM
Subject: Re: What is this bus?
On 5/28/17 8:28 PM, jim stephens via cctalk wrote:
The Pascal Microengine had a black and brushed
aluminum package
There was a bus version. I have cards, but no backplane.
2760
days inactive
2765
days old
14 comments
6 participants
participants (6)
-
aek＠bitsavers.org -
camiel.vanderhoeven＠vmssoftware.com -
cclist＠sydex.com -
jwsmail＠jwsss.com -
mhs.stein＠gmail.com -
rp＠servium.ch