(Grumble)..... I'm getting conflicting information regarding the ability to boot the 4000 from SCSI devices attached to the KFQSA SCSI adapter. Some people say you can't do it, some say they actually have done it. I have a DEC RRD-43AA CD-ROM drive, and have it connected to an external SCSI box with a cable from it to the KFQSA adapter. Onboard the 4000 are two DSSI drives. The 4000 is able to recognize and assign device identifiers to the ethernet port and the two DSSI drives, but has no clue ragarding anything attached to the SCSI (KZQSA) card. Is there anything I need to do with the "VMB" to make it recognize the CD-ROM drive, or am I missing a step? I'm attempting to boot the 4000 from the CD-ROM and start the VMS 6 installation process. Thanks! - Matt Matthew Sell Programmer On Time Support, Inc. www.ontimesupport.com (281) 296-6066 Join the Metrology Software discussion group METLIST! http://www.ontimesupport.com/cgi-bin/mojo/mojo.cgi "One World, One Web, One Program" - Microsoft Promotional Ad "Ein Volk, Ein Reich, Ein Fuhrer" - Adolf Hitler Many thanks for this tagline to a fellow RGVAC'er...