Joe <rigdonj(a)intellistar.net> wrote: I'm thinking that the "virtual terminals" are the workspaces. Um, no. As I recall it used the logging function. You set up the "to" device to be a workspace and then turn on log top or log bottom. E.g. if you turned on log bottom, then as each line was received it would be copied (by the terminal) over to the workspace set as "to" device, and if that workspace is attached to the other datacomm port then the line gets sent out that port. So I don't think you can cut-and-paste very easily, but you can set the thing up to do simple data logging. -Frank McConnell