Well, it appears to be a good moment to place my wish-list. For europeans providers mostly, even when I don't dismiss offers from the other side of the Atlantic ;-) My first field of collection is over old unix-ish systems, in particular Sun, AT&T and DEC systems, but I should like to put a hand in other more "exotic" systems, like Masscomp, Sequent's Pentium and 486 systems, Data General, Tandem... The second is about old CP/M systems. One Morrow, Cromenco, or S100 system (capable of use 8", 5"25 and Hard Disk) would be fine. And one Apple II with CP/M board installed (trying to kill two birds with one shot). Not much, isn't so ? The third is about old IBM PC items, mostly peripherals (One Corvus device, for example) that could be used too with the CP/M systems, but software too. I have already over 100 original software packages, but recentrly I've obtained more space to store this items. In the DEC (more or less) side: * One Decwriter, plus cable set * A couple of RL02 units, plus cable set * A couple of Pertec Units, Cipher or TSV05 type * Two 42" Dec racks * One RX02 unit * One MFM HD-FD controller for Qbus * One Teletype * One serial Paper Tape reader-puncher * One Unibus PDP-11 * One PDP/8-E * One Decmate * One GT-40 terminal * One VT52 terminal * Some VT10x terminals, like 103, 125 and so on. In the AT&T side: * 3B2/400 spares (boards) and software. Docs are welcome but I have a lot already. * One 3B1, operative, with lan capabilities, plus software and docs. * One 3B2 "high" (600, 1000, etc) * One AT&T/NCR StarServer In the Sun side: * One Sun1 system * One Sun2 system * Monitors for Sun3 monochrome systems. Eizo Flexscan 6500 perhaps ? * Keyboard/Mouse for Sun3 * Some kind of "High" Sun3 system(s) FInally, I should like to obtain in some moment of my life one HP-1000 or 2100, and one HP-3000 of the old-style. This one was the first computer where I worked. I had the instruction to mount the disk of work and use the Cobol Compiler. Cheers Sergio