pinout for Vector Graphic's ZCB cable - test-drb@ccmp.vtda.org

16 Jun 2010

It's just a straightforward 16-pin DIP to DB25 IDC ribbon cable, DIP pin 16 
aligned with DB25 pin 1.

Boy, those are huge files, almost 70MB; my copy from Howard Harte's site is 
only 3MB (there are several revisions BTW).

mike
*******************************************

Date: Wed, 16 Jun 2010 08:35:50 -0400
From: "Bill Degnan" <billdeg at degnanco.com>
Subject: re: pinout for Vector Graphic's ZCB cable

...

 I have a Vector Graphic's ZCB cable that is wired for a 9600b 8/n/1 serial
...
  terminal.  It was working yesterday, but the
connections were brittle and a
...
  few of the wires have come loose from the  25-pin
connector.  I can see the
...
  spots where the solder was applied but I am not
confident that I have the 
...
  correct repair points.  Does anyone have the pinouts
for this cable so I 
...
  can re-solder/replace?  <snip> 
I believe this is the answer to my question
page 10 of
http://vector-graphic.info/vg_zcb.aspx (download/part 2)
Bill