Yup, and there is a jumper buried over on the side that
is labelled "RX01
EN" (presumably to enable it as an RX01 controller).
So I think we've got it nailed as an RX01/RX02
controller, which is cool
since I've got an RX01 drive, but those are 8" drives and the connector
is only 26 pins. What I'm looking for is an M7555 or equivalent to
control a couple of RX33's on one of the uVaxen (and RX33s too). My plan
being that if I can re-configure a loadable media type on my second uVax
it would be something tradeable in the future.
Be careful... it wants to talk to the RX01/02 equivalent designed
by DSD... it most probably will NOT speak to a true DEC RX01/RX02
drive...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work):
gentry!zk3.dec.com |
| Unix Support Engineering Group | (home):
mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL:
http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+