Now that I've got it back running V5.4 I noticed
something interesting,
under V5.3 when you do a 'SHOW DEV' in the section for DU it lists the how
DU0: through DU7: are configured. This is very nice when you've got
partitions ranging across a couple disks. However, this feature seems to
be missing under V5.4, is there any way to get this information, or do I
simply need to write it down?
Do a "SHOW DEV:DU" and you'll see it - for example, on my 5.7 system:
.show dev:du
Device Status CSR Vector(s)
------ ------ --- ---------
DU Resident 172150 154 150 144 140
DU0: is set PORT = 0, UNIT = 0, PART = 0
DU1: is set PORT = 0, UNIT = 1, PART = 0
DU2: is set PORT = 0, UNIT = 2, PART = 0
DU3: is set PORT = 0, UNIT = 3, PART = 0
DU4: is set PORT = 0, UNIT = 4, PART = 0
DU5: is set PORT = 0, UNIT = 5, PART = 0
DU6: is set PORT = 0, UNIT = 6, PART = 0
DU7: is set PORT = 0, UNIT = 7, PART = 0
D10: is set PORT = 0, UNIT = 8, PART = 0
D11: is set PORT = 0, UNIT = 9, PART = 0
D12: is set PORT = 0, UNIT = 10, PART = 0
D13: is set PORT = 0, UNIT = 11, PART = 0
D14: is set PORT = 0, UNIT = 12, PART = 0
D15: is set PORT = 0, UNIT = 13, PART = 0
D16: is set PORT = 0, UNIT = 14, PART = 0
D17: is set PORT = 0, UNIT = 15, PART = 0
D20: is set PORT = 0, UNIT = 16, PART = 0
D21: is set PORT = 0, UNIT = 17, PART = 0
D22: is set PORT = 0, UNIT = 18, PART = 0
D23: is set PORT = 0, UNIT = 19, PART = 0
D24: is set PORT = 0, UNIT = 20, PART = 0
D25: is set PORT = 0, UNIT = 21, PART = 0
D26: is set PORT = 0, UNIT = 22, PART = 0
D27: is set PORT = 0, UNIT = 23, PART = 0
D30: is set PORT = 0, UNIT = 3, PART = 0
D31: is set PORT = 0, UNIT = 3, PART = 1
D32: is set PORT = 0, UNIT = 3, PART = 2
D33: is set PORT = 0, UNIT = 3, PART = 3
D34: is set PORT = 0, UNIT = 3, PART = 4
D35: is set PORT = 0, UNIT = 3, PART = 5
D36: is set PORT = 0, UNIT = 3, PART = 6
D37: is set PORT = 0, UNIT = 3, PART = 7
D40: is set PORT = 0, UNIT = 4, PART = 0
D41: is set PORT = 0, UNIT = 4, PART = 1
D42: is set PORT = 0, UNIT = 4, PART = 2
D43: is set PORT = 0, UNIT = 4, PART = 3
D44: is set PORT = 0, UNIT = 4, PART = 4
D45: is set PORT = 0, UNIT = 4, PART = 5
D46: is set PORT = 0, UNIT = 4, PART = 6
D47: is set PORT = 0, UNIT = 4, PART = 9
D50: is set PORT = 0, UNIT = 4, PART = 8
D51: is set PORT = 0, UNIT = 4, PART = 9
D52: is set PORT = 0, UNIT = 4, PART = 10
D53: is set PORT = 0, UNIT = 43, PART = 0
D54: is set PORT = 0, UNIT = 44, PART = 0
D55: is set PORT = 0, UNIT = 45, PART = 0
D56: is set PORT = 0, UNIT = 46, PART = 0
D57: is set PORT = 0, UNIT = 47, PART = 0
D60: is set PORT = 0, UNIT = 4, PART = 0
D61: is set PORT = 0, UNIT = 5, PART = 0
D62: is set PORT = 0, UNIT = 6, PART = 0
D63: is set PORT = 0, UNIT = 7, PART = 0
D64: is set PORT = 0, UNIT = 8, PART = 0
D65: is set PORT = 0, UNIT = 9, PART = 0
D66: is set PORT = 0, UNIT = 10, PART = 0
D67: is set PORT = 0, UNIT = 11, PART = 0
D70: is set PORT = 0, UNIT = 4, PART = 1
D71: is set PORT = 0, UNIT = 5, PART = 1
D72: is set PORT = 0, UNIT = 6, PART = 1
D73: is set PORT = 0, UNIT = 7, PART = 1
D74: is set PORT = 0, UNIT = 8, PART = 1
D75: is set PORT = 0, UNIT = 9, PART = 1
D76: is set PORT = 0, UNIT = 10, PART = 1
D77: is set PORT = 0, UNIT = 11, PART = 1
Another thing that helps with keeping tracks of large numbers
of partitions is to assign descriptive Volume ID and owner
fields to the partitions. For example:
.init ld4:/volu
LD4:/Initialize; Are you sure? Y
Volume ID? junk
Owner? me
.dir/vol ld4:
Volume ID: junk
Owner : me
0 Files, 0 Blocks
1986 Free blocks
Presumably, you'll find something more useful than "junk" and
"me"
to fill the fields in with :-)
--
Tim Shoppa Email: shoppa(a)trailing-edge.com
Trailing Edge Technology WWW:
http://www.trailing-edge.com/
7328 Bradley Blvd Voice: 301-767-5917
Bethesda, MD, USA 20817 Fax: 301-767-5927