12 Feb
2018
12 Feb
'18
6:21 a.m.
Jorg Hoppe:
I am the proud owner of an old pdp11/05. I does not have a M9970 (nor can I find one).
So I cant do 20ma/rs232 output. I read in somebodies note about jumpers @W1 and W2 on the
M7261F that I have. Apparently cutting one of these disables the onboard uart and will
allow me to put in a serial card. I cant find the jumpers. Nor can I find a print set.
Any suggestions?
12 Feb
12 Feb
7:43 a.m.
-----Original Message-----
From: cctalk [mailto:cctalk-bounces at classiccmp.org] On Behalf Of sop00000h
via cctalk
Sent: 12 February 2018 11:22
To: cctech at classiccmp.org
Subject: PDP 11/05 - looking for help - looking for Jorg Hoppe?
Jorg Hoppe:
I am the proud owner of an old pdp11/05. I does not have a M9970 (nor can
I
find one). So I cant do 20ma/rs232 output. I read in
somebodies note
about
jumpers @W1 and W2 on the M7261F that I have.
Apparently cutting one of
these disables the onboard uart and will allow me to put in a serial card.
I
cant find the jumpers. Nor can I find a print set.
Any suggestions?
Its not a slim line 11/505 is it, in which case you don't appear to need the
M9970.
If its not would it be possible to make an M9970. They appear to be just
passive
http://www.vintagecomputer.net/digital/pdp11-05/dec_M9970_BERG_BACKPLANE_CON
NECTOR.JPG
Or pick up the signals from the wire wrap as described here :-
https://groups.google.com/forum/#!topic/vmsnet.pdp-11/_FavYTL-5Bg
you can pick-up the signals fron the backplane, with a wire-wrap
tool.
send data+ 20ma-tty FE2
sent data- 20ma-tty FJ2
sent data ttl-level DF1
Gnd on DC2 and DT1
rec data+ 20ma-tty FN1
rec data- 20ma-tty FP1
rec data ttl-level FM1
Gnd on FC2 and FT1
Hope this helps. Just what I found by googling as I was curious as to what
an M9970 was
Dave
2352
days inactive
2352
days old
1 comments
2 participants
participants (2)
-
dave.g4ugm＠gmail.com -
sop00000h＠scotnet.co.uk