16 Dec
2007
16 Dec
'07
11:37 a.m.
On 16 Dec 2007 at 9:06 dwight elvey <dkelvey at hotmail.com>
These are all 5.25inch. As far as I know, 10 sectored
was
the most common. I don't know of any that used 16 sectored
and never heard of 9 sectored.
The Vector Graphic systems all used 16-sector media and I've seen a
few others systems as well.
So, I'd be safe by generalizing that 8" 32-sector and 5.25" 10- and
16-sector covers just about all of the hard-sector media in common
use? Does anyone know of any other "common" 8" hard-sector media?
Thanks,
Chuck
16 Dec
16 Dec
12:47 p.m.
From: cclist at sydex.com
On 16 Dec 2007 at 9:06 dwight elvey
Hi Chuck
Other than the 32, I did once see one with holes around
the outside of the disk. I have no idea how many sectors it was.
My Nicolet uses the 32 hard sectored but actually writes
two sectors of 16 holes each. It has a counter in the controller
to keep track.
So it is possible that other controllers use multiple sector
holes for each data sector.
Dwight
_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!
http://club.live.com/chicktionary.aspx?icid=chick_wlhmtextlink1_dec
These are all 5.25inch. As far as I know, 10
sectored was
the most common. I don't know of any that used 16 sectored
and never heard of 9 sectored.
The Vector Graphic systems all used 16-sector media and I've seen a
few others systems as well.
So, I'd be safe by generalizing that 8" 32-sector and 5.25" 10- and
16-sector covers just about all of the hard-sector media in common
use? Does anyone know of any other "common" 8" hard-sector media?
Thanks,
Chuck
6216
days inactive
6216
days old
1 comments
2 participants
participants (2)
-
cclist＠sydex.com -
dkelvey＠hotmail.com