7 Aug
2001
7 Aug
'01
11:12 p.m.
Ok, what vintage are these things? I got another one
on Ebay (I know, I
know) but I can really use the ports. Anyway, this one is the 16 port with
only 1MB of RAM. I looked through the manuals on www.dnpg.com and there is
no reference to how one might open up one of these and increase the ram to
2MB. Clues anyone?
It may not be upgradeable. To open one up, depress the two latches on the
bottom of the unit near the front edge and pop open the top. It isn't easy
unless you have three or four hands. If there are SIMM slots the memory
can be upgraded.
--
Eric Dittman
dittman(a)dittman.net
7 Aug
7 Aug
11:41 p.m.
New subject: RAM (was Re: DECServer again
At 11:12 PM 8/7/01 -0500, Eric wrote:
It may not be upgradeable. To open one up, depress the
two latches on the
bottom of the unit near the front edge and pop open the top. It isn't easy
unless you have three or four hands. If there are SIMM slots the memory
can be upgraded.
Ok, it does have two SIMM slots. They look like standard SIMMs could be
interesting. Are there specific requirements? The existing SIMM stick
appears to be 256K x 36 (ie a simple 1MB true parity SIMM @ either 80 or 130ns)
--Chuck
8554
days inactive
8554
days old
1 comments
2 participants
participants (2)
-
cmcmanis＠mcmanis.com -
dittman＠dittman.net