25 Nov
2012
25 Nov
'12
8:46 a.m.
There is a Kim 1 for sale in denver
http://denver.craigslist.org/sys/3289285103.html
26 Nov
26 Nov
5:01 p.m.
Nobody replied about it so maybe I'm just the odd man out but I don't
recall seeing a blue one before. Is that some known model that had a blue
circuit board? Sorta looked like a possible clone or something but it
seems to have the product stamp on it.. should be a "rev" number there too
but it's blurry. It's nice though (if legit) that the seller is open to
trading equipment. It's not a horrible price vs ebay.
On Sun, Nov 25, 2012 at 10:46 AM, Maurice Smulders <
maurice.smulders at gmail.com> wrote:
There is a Kim 1 for sale in denver
http://denver.craigslist.org/sys/3289285103.html
5:05 p.m.
Replying to myself, I guess the rev. F is blue
http://www.commodore.ca/products/kim1/kim1f_blue_lg.jpg . Not sure how
common that was, but interesting to see.
5:11 p.m.
On 11/26/2012 8:01 PM, Sam O'nella wrote:
Nobody replied about it so maybe I'm just the odd
man out but I don't
recall seeing a blue one before. Is that some known model that had a blue
circuit board? Sorta looked like a possible clone or something but it
seems to have the product stamp on it.. should be a "rev" number there too
but it's blurry. It's nice though (if legit) that the seller is open to
trading equipment. It's not a horrible price vs ebay.
On Sun, Nov 25, 2012 at 10:46 AM, Maurice Smulders<
maurice.smulders at gmail.com> wrote:
I sent an email as well - no reply here either..
steve
There is a Kim 1 for sale in denver
http://denver.craigslist.org/sys/3289285103.html
5:33 p.m.
New subject: Looking to borrow a ESDI Hard Drive controller for PCs
I have a big box of ESDI drives I just want to test and sort out the bad
ones. No reason to keep hauling them around from place to place if they
don't even work. I have no intention of using them on a PC so, I'd
rather avoid buying a card I will use once. Looking for something 16bit
ISA with built in format utilities. I'll happily pay shipping both
ways. I only need it a couple of days and will get it right back home
after.
27 Nov
27 Nov
5:22 a.m.
New subject: Looking to borrow a ESDI Hard Drive controller for PCs
On 27 November 2012 01:33, mc68010 <mc68010 at gmail.com> wrote:
I have a big box of ESDI drives I just want to test
and sort out the bad
ones. No reason to keep hauling them around from place to place if they
don't even work. I have no intention of using them on a PC so, I'd rather
avoid buying a card I will use once. Looking for something 16bit ISA with
built in format utilities. I'll happily pay shipping both ways. I only need
it a couple of days and will get it right back home after.
I think I still have an ESDI controller or 2 somewhere. I am guessing
it'd do the classic
DEBUG g=c800:5
type of low-level format.
I am happy to post 'em internationally at cost and I don't want 'em
back again afterwards. Give 'em away as free gifts with the drives, if
you like. ;?)
--
Liam Proven ? Profile: http://lproven.livejournal.com/profile
Email: lproven at cix.co.uk ? GMail/G+/Twitter/Flickr/Facebook: lproven
MSN: lproven at hotmail.com ? Skype/AIM/Yahoo/LinkedIn: liamproven
Tel: +44 20-8685-0498 ? Cell: +44 7939-087884
6:18 a.m.
New subject: Looking to borrow a ESDI Hard Drive controller for PCs
On 11/27/2012 02:33 AM, mc68010 wrote:
I have a big box of ESDI drives I just want to test
and sort out the
bad ones. No reason to keep hauling them around from place to place if
they don't even work. I have no intention of using them on a PC so,
I'd rather avoid buying a card I will use once. Looking for something
16bit ISA with built in format utilities. I'll happily pay shipping
both ways. I only need it a couple of days and will get it right back
home after.
If you find a controller and get around to testing them, I'm looking for
ESDI drives from this list:
http://hardware.majix.org/computers/sgi.iris/starting.shtml
The ESDI drive in my IRIS works, but it would be nice with a backup or two.
Regards,
Pontus.
7:25 a.m.
New subject: Looking to borrow a ESDI Hard Drive controller for PCs
On Tue, 27 Nov 2012, Pontus wrote:
On 11/27/2012 02:33 AM, mc68010 wrote:
While it is probably a long shot, I'm also looking for a Vertex V170 or
similar ST-506 compatible drive that I can use in my IRIS 1400. The
original V170 appears to have a stuck head lock but because it also
contains irreplaceable software I don't want to disassemble it until I
have the means to do so in a dust free environment. Even then it will
probably be best to have other drives to actually use in the system.
I have a big box of ESDI drives I just want to
test and sort out the
bad ones. No reason to keep hauling them around from place to place if
they don't even work. I have no intention of using them on a PC so,
I'd rather avoid buying a card I will use once. Looking for something
16bit ISA with built in format utilities. I'll happily pay shipping
both ways. I only need it a couple of days and will get it right back
home after.
If you find a controller and get around to testing them, I'm looking for
ESDI drives from this list:
http://hardware.majix.org/computers/sgi.iris/starting.shtml
The ESDI drive in my IRIS works, but it would be nice with a backup or
two.
9:52 a.m.
New subject: Looking to borrow a ESDI Hard Drive controller for PCs
On 11/27/2012 6:18 AM, Pontus wrote:
On 11/27/2012 02:33 AM, mc68010 wrote:
I just did a quick look and all mine are much larger ESDI drives. Think
the smallest is a 380mb Maxtor.
I have a big box of ESDI drives I just want to
test and sort out the
bad ones. No reason to keep hauling them around from place to place
if they don't even work. I have no intention of using them on a PC
so, I'd rather avoid buying a card I will use once. Looking for
something 16bit ISA with built in format utilities. I'll happily pay
shipping both ways. I only need it a couple of days and will get it
right back home after.
If you find a controller and get around to testing them, I'm looking
for ESDI drives from this list:
http://hardware.majix.org/computers/sgi.iris/starting.shtml
The ESDI drive in my IRIS works, but it would be nice with a backup or
two.
26 Nov
26 Nov
5:38 p.m.
New subject: Cheap PDP-11/03 on ebay
I know 11/03 are really boring but, this one didn't even get a single
bid at $99 last time and now they've relisted it starting at $19.99. If
someone doesn't pick it up I bet it gets scrapped next. Someone should
save it for $20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
5:56 p.m.
New subject: Cheap PDP-11/03 on ebay
The thing I notice about it as well is that the bay looks like the NASA
standard cabinets, at 7' or so, and is a similar color. It's in the
wrong part of the country to be from any NASA facility I know of, but
the color is right, as is the size.
Also the posting you don't mention that it is inside what is probably a
500# (min) bay that must go freight. I'd take a 19 or 99 buck 11/03,
but this will cuost either a long trip or a big freight bill.
Isn't this Will Donzelli land? Maybe he would be interested / capable
of grabbing it.
Jim
On 11/26/2012 5:38 PM, mc68010 wrote:
I know 11/03 are really boring but, this one
didn't even get a single
bid at $99 last time and now they've relisted it starting at $19.99.
If someone doesn't pick it up I bet it gets scrapped next. Someone
should save it for $20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
7:59 p.m.
New subject: Cheap PDP-11/03 on ebay
Isn't this Will Donzelli land? Maybe he would be
interested / capable of
grabbing it.
Nope, not interested (PDP-11/03 is at the bottom of the DECinterest
scale for me), unless someone pays me to go fetch it. Rochester is a
good few hours away from me.
--
Will
5:57 p.m.
New subject: Cheap PDP-11/03 on ebay
On 26/11/12 8:38 PM, mc68010 wrote:
I know 11/03 are really boring but, this one
didn't even get a single
bid at $99 last time and now they've relisted it starting at $19.99. If
someone doesn't pick it up I bet it gets scrapped next. Someone should
save it for $20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
That doesn't look boring at all!
Unfortunately I'm nowhere near. :(
--Toby
6:40 p.m.
New subject: Cheap PDP-11/03 on ebay
I just looked at the pictures again and it may look like there are no
cards in the 11/03. The cable to the RX02 is disconnected and laying on
the bottom and the 11/03 is just a black looking emptiness. Really hard
to tell for sure though.
6:50 p.m.
New subject: Cheap PDP-11/03 on ebay
On Mon, Nov 26, 2012 at 9:40 PM, mc68010 <mc68010 at gmail.com> wrote:
I just looked at the pictures again and it may look
like there are no cards
in the 11/03. The cable to the RX02 is disconnected and laying on the bottom
and the 11/03 is just a black looking emptiness. Really hard to tell for
sure though.
I think in that enclosure, the beige front attaches with a couple of
hex screws and the boards are accessed from the front.
-ethan
6:58 p.m.
New subject: Cheap PDP-11/03 on ebay
On 11/26/2012 6:50 PM, Ethan Dicks wrote:
On Mon, Nov 26, 2012 at 9:40 PM, mc68010 <mc68010
at gmail.com> wrote:
Ahh google images shows me you are 100% right. How does the RX02 cable
attach ? Are there just holes in the back for the drive cables or panels
of some sort ?
I just looked at the pictures again and it may
look like there are no cards
in the 11/03. The cable to the RX02 is disconnected and laying on the bottom
and the 11/03 is just a black looking emptiness. Really hard to tell for
sure though.
I think in that enclosure, the beige front attaches with a couple of
hex screws and the boards are accessed from the front.
-ethan
7:44 p.m.
New subject: Cheap PDP-11/03 on ebay
On Mon, Nov 26, 2012 at 9:58 PM, mc68010 <mc68010 at gmail.com> wrote:
On 11/26/2012 6:50 PM, Ethan Dicks wrote:
Without going to find one to look, IIRC, there's a gap at the bottom of
the backplane. You slip the cables through in some reasonable order
then plug them in around the front. There should be a bar or two
with wingnuts on the back of the chassis to prevent too much wiggle
I think in that enclosure, the beige front
attaches with a couple of
hex screws and the boards are accessed from the front.
-ethan
Ahh google images shows me you are 100% right. How does the RX02 cable
attach ? Are there just holes in the back for the drive cables or panels of
some sort ? from stressing the cables at the front if something is
yanked.
-ethan
5:58 p.m.
New subject: Cheap PDP-11/03 on ebay
very cool
On Mon, Nov 26, 2012 at 7:38 PM, mc68010 <mc68010 at gmail.com> wrote:
I know 11/03 are really boring but, this one
didn't even get a single bid
at $99 last time and now they've relisted it starting at $19.99. If
someone doesn't pick it up I bet it gets scrapped next. Someone should save
it for $20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/**160930444034<http://www.ebay.com/itm/160930444…
6:02 p.m.
New subject: Cheap PDP-11/03 on ebay
On Mon, Nov 26, 2012 at 8:38 PM, mc68010 <mc68010 at gmail.com> wrote:
I know 11/03 are really boring but, this one
didn't even get a single bid at
$99 last time and now they've relisted it starting at $19.99. If someone
doesn't pick it up I bet it gets scrapped next. Someone should save it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
They aren't as versatile as, say, an 11/23, but you can still run
RT11SJ on them, and they will work with a wide variety of peripherals
(RXV11 + RX01, RKV11D, RLV11+RL01...)
Of course it can be easier to find the 11/03 than those peripherals in
the first place...
-ethan
6:23 p.m.
New subject: Cheap PDP-11/03 on ebay
On 11/26/2012 09:02 PM, Ethan Dicks wrote:
On Mon, Nov 26, 2012 at 8:38 PM, mc68010 <mc68010
at gmail.com> wrote:
Think of it this way even if the /03 is limited ( it might have been
upgraded to 11/23)
you still get a RXV controller and the RX01/02 drives. Yes you can
plug a the dual width
F11 card in that and maybe even the quad width 11/23. Biggest issue is
not many slots
in the box. Either way a 03 with disks is worth more than $20!
If it wasn't a hard 10 hour drive one way from here I'd do it just to
get the rack and
the PDP11. The control peripherals may be interesting as well.
Allison
I know 11/03 are really boring but, this one
didn't even get a single bid at
$99 last time and now they've relisted it starting at $19.99. If someone
doesn't pick it up I bet it gets scrapped next. Someone should save it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
They aren't as versatile as, say, an
11/23, but you can still run
RT11SJ on them, and they will work with a wide variety of peripherals
(RXV11 + RX01, RKV11D, RLV11+RL01...)
Of course it can be easier to find the 11/03 than those peripherals in
the first place...
-ethan
6:31 p.m.
New subject: Cheap PDP-11/03 on ebay
Ethan Dicks wrote:
On Mon, Nov 26, 2012 at 8:38 PM, mc68010 <mc68010 at
gmail.com> wrote:
Just to add a few more options, as long as RT11SJ runs, then
I would expect the RT11FB would run as well. However, since
the 11/03 does not support an MMU, RT11XM is definitely not
possible.
In addition, I seem to remember that the 11/03 is not compatible
with a 22 bit backplane since the extra lines expect something else,
possibly some sort of power. Even an 18 bit backplane may not
be allowed, only a 16 bit backplane.
Also, as long as the RX01 is possible, I would expect that the RX02
is supported as well. I don't know if an RQDXn is allowed, but I
do not see why MSCP would be excluded.
I think I still have an 11/03 around, but where at this point I don't know
and I doubt that a working backplane is available.
Jerome Fine
I know 11/03 are really boring but, this one
didn't even get a single bid at
$99 last time and now they've relisted it starting at $19.99. If someone
doesn't pick it up I bet it gets scrapped next. Someone should save it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
They aren't as versatile as, say, an 11/23, but you can still run
RT11SJ on them, and they will work with a wide variety of peripherals
(RXV11 + RX01, RKV11D, RLV11+RL01...)
Of course it can be easier to find the 11/03 than those peripherals in
the first place...
6:41 p.m.
New subject: Cheap PDP-11/03 on ebay
On 11/26/2012 6:31 PM, Jerome H. Fine wrote:
It comes with an RX02 so I would hope so.
Ethan Dicks
wrote:
On Mon, Nov 26, 2012 at 8:38 PM, mc68010
<mc68010 at gmail.com> wrote:
Also, as long as the RX01 is possible, I would expect that the RX02
is supported as well. I don't know if an RQDXn is allowed, but I
do not see why MSCP would be excluded. I know 11/03 are really boring but, this one
didn't even get a
single bid at
$99 last time and now they've relisted it starting at $19.99. If
someone
doesn't pick it up I bet it gets scrapped next. Someone should save
it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
They aren't as versatile as, say, an 11/23, but you can still run
RT11SJ on them, and they will work with a wide variety of peripherals
(RXV11 + RX01, RKV11D, RLV11+RL01...)
Of course it can be easier to find the 11/03 than those peripherals in
the first place...
28 Nov
28 Nov
9:05 p.m.
New subject: part number of National Semiconductor IC or data sheet
Hi Does anyone have a data book for National Semiconductor fromaround 1990 plus or minus a
few years?I'm looking for the part number of a system management chip thatwould have
been used with the NSC800 parts.A part number or scan would be great.Dwight
10:40 p.m.
New subject: part number of National Semiconductor IC or data sheet
On 11/28/2012 09:05 PM, dwight elvey wrote:
Hi Does anyone have a data book for National Semiconductor fromaround
1990 plus or minus a few years?I'm looking for the part number of a
system management chip thatwould have been used with the NSC800
parts.A part number or scan would be great.Dwight
The NSC800 was more of National's response to the 8085, so it'd figure
that it'd have 8085-like support chips. For example, the NSC810 was
the RAM+I/O+Timer chip. Is that what you had in mind?
--Chuck
10:56 p.m.
New subject: part number of National Semiconductor IC or data sheet
On 11/28/2012 09:05 PM, dwight elvey wrote:
Hi Does anyone have a data book for National Semiconductor fromaround
1990 plus or minus a few years?I'm looking for the part number of a
system management chip thatwould have been used with the NSC800
parts.A part number or scan would be great.Dwight
Oh--and the other member was the NSC830/831 - the ROM+I/O+. Roughly,
the 8355 equivalent, where the NSC810 was the 8155 equivalent.
--CHuck
29 Nov
29 Nov
12:14 a.m.
New subject: part number of National Semiconductor IC or data sheet
Does this help?
http://www.digchip.com/datasheets/parts/datasheet/321/NSC800-pdf.php
Thomas
On Wed, Nov 28, 2012 at 8:56 PM, Chuck Guzis <cclist at sydex.com> wrote:
On 11/28/2012 09:05 PM, dwight elvey wrote:
Hi Does anyone have a data book for National Semiconductor fromaround
1990 plus or minus a few years?I'm looking for the part number of a
system management chip thatwould have been used with the NSC800
parts.A part number or scan would be great.Dwight
Oh--and the other member was the NSC830/831 - the ROM+I/O+. Roughly, the
8355 equivalent, where the NSC810 was the 8155 equivalent.
--CHuck
30 Nov
30 Nov
10:42 p.m.
New subject: part number of National Semiconductor IC or data sheet
No, I'm looking for a chip that would run reset andbattery voltage for static
RAM.I'm trying to repair battery damage done on the power unit boardof my MA2000
modules. It was mounted as a black epoxy covereddie so no part number. Still it was likely
a NS standard partor else how would they get the naked die to mount. Atleast that is what
I'm thinking although it may have beena Maxim part bought as a naked die.Dwight
Date: Wed, 28 Nov 2012 22:56:33 -0800
From: cclist at sydex.com
To:
Subject: Re: part number of National Semiconductor IC or data sheet
On 11/28/2012 09:05 PM, dwight elvey wrote:
Hi Does anyone have a data book for National Semiconductor fromaround
1990 plus or minus a few years?I'm looking for the part number of a
system management chip thatwould have been used with the NSC800
parts.A part number or scan would be great.Dwight
Oh--and the other member was the NSC830/831 - the ROM+I/O+. Roughly,
the 8355 equivalent, where the NSC810 was the 8155 equivalent.
--CHuck
1 Dec
1 Dec
8:31 p.m.
New subject: part number of National Semiconductor IC or data sheet
On 11/30/2012 10:42 PM, dwight elvey wrote:
No, I'm looking for a chip that would run reset andbattery voltage
for static RAM.I'm trying to repair battery damage done on the power
unit boardof my MA2000 modules. It was mounted as a black epoxy
covereddie so no part number. Still it was likely a NS standard
partor else how would they get the naked die to mount. Atleast that
is what I'm thinking although it may have beena Maxim part bought as
a naked die.Dwight
Do you mean something like a Benchmarq BQ2204 (now a TI property, used
to be part of Unitrode)?
--Chuck
29 Nov
29 Nov
10:59 a.m.
New subject: part number of National Semiconductor IC or data sheet
On 11/28/12 9:05 PM, dwight elvey wrote:
1990 plus or minus a few years?I'm looking for the part number of a system management
chip thatwould have been used with the NSC800 parts.
1990 is REALLY late for NSC800. The only NSC800 catalog I have was from 1981. By 1990,
everything is COP/HPC
11:43 a.m.
New subject: part number of National Semiconductor IC or data sheet
On Wed, 28 Nov 2012, dwight elvey wrote:
Hi Does anyone have a data book for National
Semiconductor fromaround
1990 plus or minus a few years?I'm looking for the part number of a
system management chip thatwould have been used with the NSC800 parts.A
part number or scan would be great.Dwight
I have a 1980 edition of the Interface Databook and a 1985 edition of the
NSC800 Microprocessor Family Databook. Would either of these have the
information you are looking for?
26 Nov
26 Nov
7:46 p.m.
New subject: Cheap PDP-11/03 on ebay
At 9:02 PM -0500 11/26/12, Ethan Dicks wrote:
They aren't as versatile as, say, an 11/23, but you
can still run
RT11SJ on them, and they will work with a wide variety of peripherals
(RXV11 + RX01, RKV11D, RLV11+RL01...)
Of course it can be easier to find the 11/03 than those peripherals in
the first place...
Yeah, the RKV11D would be a pain to find. The others, not so much.
Personally I think the /03 is the least interesting thing in that
rack, the only thing that makes the /03 at all interesting is a
couple DEC analogue to digital (or is it the other way around, I
forget) boards I have that apparently will only work in the /03.
I wonder what the system was used for, especially given the location
of Rochester, NY.
Zane
--
| Zane H. Healy | UNIX Systems Administrator |
| healyzh at aracnet.com | OpenVMS Enthusiast |
| | Photographer |
+----------------------------------+----------------------------+
| My flickr Photostream |
| http://www.flickr.com/photos/33848088 at N03/ |
| My Photography Website |
| http://www.zanesphotography.com |
27 Nov
27 Nov
12:15 a.m.
New subject: Cheap PDP-11/03 on ebay
On 27/11/2012 01:38, mc68010 wrote:
I know 11/03 are really boring but, this one
didn't even get a single
bid at $99 last time and now they've relisted it starting at $19.99.
If someone doesn't pick it up I bet it gets scrapped next. Someone
should save it for $20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
Why do these not appear in trhe UK:-(
--
Dave Wade G4UGM
Illegitimi Non Carborundum
2:47 p.m.
New subject: Cheap PDP-11/03 on ebay
or in canada
On Tue, Nov 27, 2012 at 2:15 AM, Dave Wade <dave.g4ugm at gmail.com> wrote:
On 27/11/2012 01:38, mc68010 wrote:
I know 11/03 are really boring but, this one
didn't even get a single bid
at $99 last time and now they've relisted it starting at $19.99. If someone
doesn't pick it up I bet it gets scrapped next. Someone should save it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/**160930444034<http://www.ebay.com/itm/160930444…
Why do these not appear in trhe UK:-(
--
Dave Wade G4UGM
Illegitimi Non Carborundum
4:25 p.m.
New subject: Cheap PDP-11/03 on ebay
On Nov 27, 2012, at 5:47 PM, Adrian Stoness wrote:
On Tue, Nov 27, 2012 at 2:15 AM, Dave Wade
<dave.g4ugm at gmail.com> wrote:
To be fair, Rochester isn't *that* far from Canada, for specific
values of "Canada".
- Dave
Why do these not appear in trhe UK:-(
or in canada 
4:36 p.m.
New subject: Cheap PDP-11/03 on ebay
i'm 1400 miles away
On Tue, Nov 27, 2012 at 6:25 PM, David Riley <fraveydank at gmail.com> wrote:
On Nov 27, 2012, at 5:47 PM, Adrian Stoness wrote:
On Tue, Nov 27, 2012 at 2:15 AM, Dave Wade
<dave.g4ugm at gmail.com> wrote:
To be fair, Rochester isn't *that* far from Canada, for specific
values of "Canada".
- Dave
Why do these not appear in trhe UK:-(
or in canada
8:06 p.m.
New subject: Cheap PDP-11/03 on ebay
On 27/11/12 5:47 PM, Adrian Stoness wrote:
or in canada
Dude, we couldn't handle them if they did. Transport, space, ...
:(
--Toby
On Tue, Nov 27, 2012 at 2:15 AM, Dave Wade<dave.g4ugm at gmail.com> wrote:
On 27/11/2012 01:38, mc68010 wrote:
... Looks like Rochester, NY.
http://www.ebay.com/itm/**160930444034<http://www.ebay.com/itm/160930444…
Why do these not appear in trhe UK:-(
--
Dave Wade G4UGM
Illegitimi Non Carborundum
3 Dec
3 Dec
4:16 p.m.
New subject: Cheap PDP-11/03 on ebay
On Mon, Nov 26, 2012 at 7:38 PM, mc68010 <mc68010 at gmail.com> wrote:
I know 11/03 are really boring but, this one
didn't even get a single bid at
$99 last time and now they've relisted it starting at $19.99. If someone
doesn't pick it up I bet it gets scrapped next. Someone should save it for
$20 if they are local. Looks like Rochester, NY.
http://www.ebay.com/itm/160930444034
Went for just $60 - anyone want to 'fess up to taking on another full rack?
--
jht
5:48 p.m.
New subject: Cheap PDP-11/03 on ebay
never got a responce on my shipping quote so i did not bid on it sigh :(
gave them all the info they needed even
On Mon, Dec 3, 2012 at 6:47 PM, mc68010 <mc68010 at gmail.com> wrote:
On 12/3/2012 4:16 PM, Jason T wrote:
Went for just $60 - anyone want to 'fess up
to taking on another full
rack?
Wasn't me but, someone got a great deal. That's even better than $99 which
was silly cheap.
4400
days inactive
4409
days old
40 comments
23 participants
participants (23)
-
aek＠bitsavers.org -
ajp166＠verizon.net -
barythrin＠gmail.com -
bfranchuk＠jetnet.ab.ca -
cclist＠sydex.com -
dave.g4ugm＠gmail.com -
dkelvey＠hotmail.com -
ethan.dicks＠gmail.com -
fraveydank＠gmail.com -
healyzh＠aracnet.com -
jhfinedp3k＠compsys.to -
jwsmail＠jwsss.com -
lproven＠gmail.com -
maurice.smulders＠gmail.com -
mc68010＠gmail.com -
pontus＠update.uu.se -
shumaker＠att.net -
silent700＠gmail.com -
tdk.knight＠gmail.com -
thomasmernst＠gmail.com -
toby＠telegraphics.com.au -
tothwolf＠concentric.net -
wdonzelli＠gmail.com