20 Apr
2003
20 Apr
'03
6:07 p.m.
I am in need of software for the UP200 programmer. LMK if you have it and
could send me a copy via email. Just picked up a unit and want to get
programming.
Thanks,
Stan
21 Apr
21 Apr
12:56 a.m.
--- MIchelle Zygo <yarnhook(a)charter.net> wrote:
I am in need of software for the UP200 programmer. LMK
if you have it and
could send me a copy via email. Just picked up a unit and want to get
programming.
I don't have one that old. I have a B&C Microsystems model UP600A. I
think I have the second-to-newest software for it.
I have found the UP600A unreliable in 386 and 486 computers. I suspect
it is software related, not hardware related (the hardware is a B&C
proprietary parallel card (that send power down the same cable as data)
attached to a large box with a multi-channel D-to-A and a 40-pin ZIF
socket - there are dozens of chips in the programmer box itself). I
used to have mine in a Commodore Colt; now it's in the base station of
a Compaq SLT/286.
I don't know where you could find software for your UP200. I searched
long and hard for software for my UP600A when my Colt died. In the
end, I was able to recover the data from its XT-IDE drive, and that's
what's on the SLT/286.
Good Luck,
-ethan
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
8:33 a.m.
--------------------------------------------------------------------------------
B&C Microsystems Inc.
750 North Pastoria Avenue
Sunnyvale, CA 94086
Phone: 408.730.5511
Fax: 408.730.5521
BBS: 408.730.2317
Try this, they might still exist.
At 05:54 AM 4/21/03 -0700, you wrote:
--- MIchelle Zygo <yarnhook(a)charter.net> wrote:
I am in need of software for the UP200
programmer. LMK if you have it and
could send me a copy via email. Just picked up a unit and want to get
programming.
I don't have one that old. I have a B&C Microsystems model UP600A. I
think I have the second-to-newest software for it.
I have found the UP600A unreliable in 386 and 486 computers. I suspect
it is software related, not hardware related (the hardware is a B&C
proprietary parallel card (that send power down the same cable as data)
attached to a large box with a multi-channel D-to-A and a 40-pin ZIF
socket - there are dozens of chips in the programmer box itself). I
used to have mine in a Commodore Colt; now it's in the base station of
a Compaq SLT/286.
I don't know where you could find software for your UP200. I searched
long and hard for software for my UP600A when my Colt died. In the
end, I was able to recover the data from its XT-IDE drive, and that's
what's on the SLT/286.
Good Luck,
-ethan
The New Yahoo! Search - Faster. Easier. Bingo
http://search.yahoo.com
12:11 p.m.
At 05:54 AM 4/21/03 -0700, you wrote:
--- MIchelle Zygo <yarnhook(a)charter.net> wrote:
> I am in need of software for the UP200 programmer. LMK if you have it and
> could send me a copy via email. Just picked up a unit and want to get
> programming.
I now have what is supposedly a copy of the software, :) if you're still
interested in it email me directly and I'll email it out to you. I also
have a copy of the UP600 software :)
7916
days inactive
7916
days old
3 comments
3 participants
participants (3)
-
erd_6502＠yahoo.com -
geoffr＠zipcon.net -
yarnhook＠charter.net