5 Mar
2021
5 Mar
'21
4:19 a.m.
Hi,
I habe some pdp10 related docs which need to go away.
Anybody interested? Or should I dump it (and reuse the white folders foro pdp8 stuff)?
https://www.icloud.com/sharedalbum/#B0r5oqs3qGclUOi
Kind regards
Philipp
--
Dipl.-Inf. (FH) Philipp Hachtmann
Buchdruck, Bleisatz, Spezialit?ten
Klus 16
31073 Delligsen
Mobil: 0171/2632239
UStdID DE 202668329
6:56 a.m.
I suppose some manual titles might help to determine what you have. Seems like quite a lot
of manuals though!
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Philipp
Hachtmann via cctalk
Sent: 05 March 2021 12:20
To: cctalk at classiccmp.org
Subject: Pdp10 and TOPS 10 stuff
Hi,
I habe some pdp10 related docs which need to go away.
Anybody interested? Or should I dump it (and reuse the white folders foro
pdp8 stuff)?
https://www.icloud.com/sharedalbum/#B0r5oqs3qGclUOi
Kind regards
Philipp
--
Dipl.-Inf. (FH) Philipp Hachtmann
Buchdruck, Bleisatz, Spezialit?ten
Klus 16
31073 Delligsen
Mobil: 0171/2632239
UStdID DE 202668329=
2:18 p.m.
On Mar 5, 2021, at 4:19 AM, Philipp Hachtmann via cctalk <cctalk at classiccmp.org>
wrote:
Hi,
I habe some pdp10 related docs which need to go away.
Anybody interested? Or should I dump it (and reuse the white folders foro pdp8 stuff)?
https://www.icloud.com/sharedalbum/#B0r5oqs3qGclUOi
Kind regards
Philipp
Hopefully someone in close by in Europe responds, I?m not sure I want to know what it
would cost to ship this to the US. I have to agree with Rob, it would help to know what
you have. Do you at least know what isn?t already on Bitsavers? I really hate to see the
loss of any PDP-10 documentation at this point.
Zane
6 Mar
6 Mar
8:49 a.m.
I am in the UK and wouldn't mind any interesting manuals. However, since Brexit I
don't think postage to the UK is all that cheap and simple either!
I don't have a PDP10 (I wish I did!), but I do run the SIMH PDP10 occasionally to run
TOPS20.
In fact, I would like to take the opportunity to once again ask if anyone happens to have
a copy of the PDP10 port of ALGOL68C? I would dearly love to find this.
Regards
Rob
-----Original Message-----
From: cctalk <cctalk-bounces at classiccmp.org> On Behalf Of Zane Healy via
cctalk
Sent: 05 March 2021 22:19
To: Philipp Hachtmann <hachti at hachti.de>; General Discussion: On-Topic
and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Pdp10 and TOPS 10 stuff
On Mar 5, 2021, at 4:19 AM, Philipp Hachtmann via cctalk
<cctalk at classiccmp.org> wrote:
Hi,
I habe some pdp10 related docs which need to go away.
Anybody interested? Or should I dump it (and reuse the white folders foro
pdp8
stuff)?
https://www.icloud.com/sharedalbum/#B0r5oqs3qGclUOi
Kind regards
Philipp
Hopefully someone in close by in Europe responds, I?m not sure I want to
know what it would cost to ship this to the US. I have to agree with Rob, it
would help to know what you have. Do you at least know what isn?t already
on Bitsavers? I really hate to see the loss of any PDP-10 documentation at
this point.
Zane
9:35 a.m.
On Mar 6, 2021, at 8:49 AM, Rob Jarratt <robert.jarratt at ntlworld.com> wrote:
I am in the UK and wouldn't mind any interesting manuals. However, since Brexit I
don't think postage to the UK is all that cheap and simple either!
I don't have a PDP10 (I wish I did!), but I do run the SIMH PDP10 occasionally to run
TOPS20.
In fact, I would like to take the opportunity to once again ask if anyone happens to have
a copy of the PDP10 port of ALGOL68C? I would dearly love to find this.
Regards
Rob
Did you look at Al?s dump of tape images this week? I noticed one or two of them are
supposed to be ALGOL related, but haven?t had time to even think about looking into the
PDP-10 stuff that was included.
Zane
10:54 a.m.
I did indeed take a quick look but there didn't seem to be anything in there. I might
have missed something though.
Regards
Rob
-----Original Message-----
From: Zane Healy <healyzh at avanthar.com>
Sent: 06 March 2021 17:36
To: rob at jarratt.me.uk
Cc: General Discussion: On-Topic and Off-Topic Posts
<cctalk at classiccmp.org>; Philipp Hachtmann <hachti at hachti.de>
Subject: Re: Pdp10 and TOPS 10 stuff
On Mar 6, 2021, at 8:49 AM, Rob Jarratt <robert.jarratt at ntlworld.com>
wrote:
I am in the UK and wouldn't mind any interesting manuals. However, since
Brexit I don't think postage to the UK is all that cheap and simple either!
I don't have a PDP10 (I wish I did!), but I do run the SIMH PDP10
occasionally
to run TOPS20.
In fact, I would like to take the opportunity to once again ask if anyone
happens
to have a copy of the PDP10 port of ALGOL68C? I would dearly love
to find this.
Regards
Rob
Did you look at Al?s dump of tape images this week? I noticed one or two of
them are supposed to be ALGOL related, but haven?t had time to even think
about looking into the PDP-10 stuff that was included.
Zane
1386
days inactive
1387
days old
6 comments
4 participants
participants (4)
-
aek＠bitsavers.org -
hachti＠hachti.de -
healyzh＠avanthar.com -
robert.jarratt＠ntlworld.com