Hi! I made this offer at Vintage-Computer.com forums and got some response so am also making the same offer on CCTALK. The following link is the design I referring to: http://n8vem-sbc.pbworks.com/w/browse/#view=ViewFolder&param=SCSI2IDE I am trying to decide what to do with the SCSI to IDE/SD project. I think it would be a good and helpful thing to have but recognize it may be too specific or overcome by events. If you are interested in buying a prototype board please contact me at mailto:LYNCHAJ at YAHOO.COM?subject=SCSI2IDE If there are 5 people interested I can get a batch of five PCBs made for $150 or $30 each. If there are 10 I think I can get the prototype board cost reduced to around $20 each. Please note if you buy a prototype board you don't have to actually build and test it. You can buy a board and have it sent to a volunteer builder for build and test. If the SCSI2IDE project is to succeed we have to get past the prototype board phase and into the hands of builders for coding. Obviously with prototype boards there are no assurances and you can expect there will be problems. We have to find those and fix them before a manufactured PCB is even a possibility. Thanks and have a nice day! Andrew Lynch