7 Mar
1999
7 Mar
'99
12:09 a.m.
Last year you sent out a request for info about HP7475A Plotter pens. Like you, I am now
trying to get one working. DId you find a source for pens? Also, do you have any idea
where I can get a plotter manual? Even xerox copies of the important pages would help.
ALso, any idea what cable is required. Thanks.
Allen Rose / West Palm Beach FL
Pls reply to p025558b(a)pb.seflin.org
7 Mar
7 Mar
2:57 p.m.
Mindy Fuchs wrote:
DId you find a source for pens?
I been looking for inexpensive pens but, haven't found a source. They
are offered pretty often on Ebay but, don't seem to be a great bargain.
I also understand that Drafting Supply & Blueprint retailers carry them.
Also, do you have any idea where I can get a plotter
manual?
I'm still looking for a manuals for a 7550. They are more difficult to
find than the plotters.
Also, any idea what cable is required.
I did some searching and found cabling info on HPs site. Sorry, I don't
remember the URL. If I stumble across it again, I'll let you know.
Steve Robertson <steverob(a)hotoffice.com>
3:25 p.m.
Hi Allen, Greetings from Orlando.
At 11:09 AM 3/7/99 -0000, you wrote:
Last year you sent out a request for info about HP7475A
Plotter pens.
Like you, I am now trying to get one working. DId you find a source
for
pens?
There's tons of them advertised on E-bay. I've found piles of them at
hamfest and thift stores.
Also, do you have any idea where I can get a plotter manual?
HP probably still has them.
Even xerox copies of the important pages would help. ALso, any idea what
cable is required.
Depends on which interface you have on the computer and on the plotter.
Joe
8 Mar
8 Mar
3:29 a.m.
Hello -
Try Precision Data Products:
5036 Falcon View
Kentwood, MI 49512
616/698-2242
I haven't ordered from them for awhile but they used to carry them.
Cable:
db9s db25s
1 4
2 2
3 3
4 5,6
5 7
6,8 20
7 8
mode com1:9600,n,8,1,p
mode lpt1=com1:
print fname
Actually, if you use XON/XOFF hand shaking you probably only need
pins 2, 3 and 7.
plotter
2 transmit
3 receive
4 rts
5 cts
6 dsr
7 gnd
8 received line signal detector
17 external clock input
20 dtr
23 dsr
john
Hi Allen, Greetings from Orlando.
At 11:09 AM 3/7/99 -0000, you wrote:
--
***********************************************************************
* John Ott * Email: jott(a)saturn.ee.nd.edu *
* Dept. Electrical Engineering * *
* 275 Fitzpatrick Hall * *
* University of Notre Dame * Phone: (219) 631-7752 *
* Notre Dame, IN 46556 USA * *
***********************************************************************
Last year you sent out a request for info about
HP7475A Plotter pens.
Like you, I am now trying to get one working. DId you find a
source for
pens?
There's tons of them advertised on E-bay. I've found piles of them at
hamfest and thift stores.
Also, do you have any idea where I can get a plotter manual?
HP probably still has them.
Even xerox copies of the important pages would help. ALso, any idea what
cable is required.
Depends on which interface you have on the computer and on the plotter.
Joe
6:59 a.m.
Last year you sent out a request for info about
HP7475A Plotter
pens. Like you, I am now trying to get one working. DId you find a
source for pens?
I found a pack of pens in with some unrelated items I have, still in the HP
sealed inflated "bag". HP brand, for paper plots, fiber-Tip paper plotter
pens, contents 5 orange plotter pens with narrow line width, designed
specifically for: HP plotters. 0.3 mm, reorder number 17839P, water based.
$5 and I will stick the bag in a bubble envelope and mail it to you.
Also Allelec.com (All Tech electronics in Santa Ana) carries the same item
for $5.95 in their store, no idea what shipping etc. is, but they have more
than just orange. ;)
9293
days inactive
9294
days old
4 comments
5 participants
participants (5)
-
jott＠cerberus.ee.nd.edu -
mikeford＠netwiz.net -
rigdonj＠intellistar.net -
steverob＠hotoffice.com -
tomeditf＠worldnet.att.net