Not really classic in this model, however: I have an AS/400e 9401-150 server and associated hardware that needs a new home. I obtained it last year and do not have the bandwidth to do anything with it. I have not powered the server up, but I was told it works. The front appears to have taken a hit in the lower left (dented grate behind and screw mount snapped--reglued) and the face shows some scrapes. The back half-round cover is missing. I believe the previous owner obtained it 2nd hand for dev work. 2-32 meg mem modules, 2-4.x gig drives (59H7001) se scsi, CD, QIC 4/8 DL SLR5 tape drive, 90H9241 twinax card. IBM 3477 InfoWindow terminal w/ 122 key kb. Found that the power button needs to be pressed down a bit when released (for ON) to have it catch. IBM 3197 terminal sans keyboard--never got it. Term powers up with 0A00 and 'k' on the bottom center. Two lexmark 4028 AS1 laser printers. I have a note on one from last year that the pickup roller is toast. The other says OK, but I will check again. Box of cables. Mostly T adapters or 9 and 15 pin D-subs, one twinax cable, one MAU (really), two terms, one 8-port fan-out (21F5093), and second 8-port fanout (mod# ?), plus a few baluns and odd pieces. There are plenty of Ts, but you will probably need more cable to hook up more than one or two devices. A few misc docs. CD/Floppies: V4 OS, Client Access for 95/NT, LanStreamer PCI diags Images: www.flickr.com/photos/31439100 at N05/sets/72157624713623016/ I don't want to part it out if I can help it--goes as one group. I'll keep the printer with the toasted roller for parts if it isn't wanted. Metro-west Boston, MA. Pick-up, or I'll deliver inside the 495 area on my schedule. I will store for a while, if you are really going to collect it, or relay it. --Jim jtp at chinalake.com